InFocus LP260 manual Using the Projector, Adjusting the Image

USING THE PROJECTOR

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus.

Adjusting the Image

To focus the image, rotate the focus ring (Figure 7) until the image is clear. To zoom the image, rotate the zoom ring. This adjusts the image size without affecting focus. Turn the ring in the “Wide” direction to make the image larger and in the “Tele” direction to make the image smaller.

zoom ring

focus ring

FIGURE 7

Focus ring and zoom ring

The projector is equipped with self-locking, quick-release eleva- tor feet (Figure 8).

To raise the projector:

1Lift the front of the projector and lift the feet lock latches on both sides of the projector (Figure 8).

2Raise the projector to the height you want, then release the latches to lock the elevator feet into position. If necessary, turn the feet to fine tune the position and tilt.

11