InFocus IN5542C, IN5544C user manual IN5542/IN5542c/IN5544/IN5544c, Computer signal examples

Page 1

Projector

IN5542/IN5542c/IN5544/IN5544c

User's Manual (Technical)

Computer signal examples

Resolution (H x V)

H. frequency (kHz)

V. frequency (Hz)

Rating

Signal mode

 

 

 

 

 

720 x 400

37.9

85.0

VESA

TEXT

640 x 480

31.5

59.9

VESA

VGA (60Hz)

640 x 480

37.9

72.8

VESA

VGA (72Hz)

640 x 480

37.5

75.0

VESA

VGA (75Hz)

640 x 480

43.3

85.0

VESA

VGA (85Hz)

800 x 600

35.2

56.3

VESA

SVGA (56Hz)

800 x 600

37.9

60.3

VESA

SVGA (60Hz)

800 x 600

48.1

72.2

VESA

SVGA (72Hz)

800 x 600

46.9

75.0

VESA

SVGA (75Hz)

800 x 600

53.7

85.1

VESA

SVGA (85Hz)

832 x 624

49.7

74.5

 

Mac 16” mode

1024 x 768

48.4

60.0

VESA

XGA (60Hz)

1024 x 768

56.5

70.1

VESA

XGA (70Hz)

1024 x 768

60.0

75.0

VESA

XGA (75Hz)

1024 x 768

68.7

85.0

VESA

XGA (85Hz)

1152 x 864

67.5

75.0

VESA

1152 x 864 (75Hz)

1280 x 960

60.0

60.0

VESA

1280 x 960 (60Hz)

1280 x 1024

64.0

60.0

VESA

SXGA (60Hz)

1280 x 1024

80.0

75.0

VESA

SXGA (75Hz)

*1280 x 1024

91.2

85.0

VESA

SXGA (85Hz)

*1600 x 1200

75.0

60.0

VESA

UXGA (60Hz)

1280 x 768

47.7

60.0

VESA

W-XGA (60Hz)

1400 x 1050

65.3

60.0

VESA

SXGA+ (60Hz)

1280 x800

49.7

60.0

VESA

1280 x 800 (60Hz)

NOTE • Be sure to check the port type, signal level, timing and resolution of the computer before connecting this projector to it.

Some computers may have multiple display screen modes. Some of these modes may not be supported by this projector.

Depending on the input signal, full-size display may not be supported in some cases. Refer to the number of display pixels above.

Although the projector can display signals with resolutions up to UXGA (1600x1200), the signal will be converted to the projector’s native resolution before being displayed. The best display performance will be achieved if the input signal and native projector resolutions are identical.

Automatic adjustment may not function correctly with some input signals.

The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.

The HDMI input does not support signals marked with an "*".

009-1417-00

1

Image 1
Contents IN5542/IN5542c/IN5544/IN5544c Computer signal examplesInitial set signals BNC G/Y, B/Cb/Pb, R/Cr/Pr, H Connection to the portsComponent Video E Y, F Cb/Pb, G Cr/Pr Remote Control K in L OUT LAN Erst ? PJLink commandLamp ? Communications setting Connecting the cableRS-232C Communication Changing the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCommand Control Settings Command Control via the NetworkCommunication Port Command Format TCP #23 TCP #9715 When authentication error occurredData Length Check SumAutomatic Connection Break AuthenticationReply Data Command format Commands available only for daisy chain communicationDaisy Chain Communication Calculation of Checksum Group and ID Settings① Controlling projector Command data Get the number of connected projectors Manual detailed Operating Guide CRC RS-232C Communication / Network command tableBe EF C7 FF EA F5 IN5542/IN5542c only. *2 IN5544/IN5544c only PAL BNC BA F6 BNC Be EF Display Be EF Channel MY BUTTON-1 Be EF DE 3F Be EF AA C2 Be EF CB D3