Hasselblad Flextight 848 manual Align the top edge

Page 23

Hardware Reference - Flextight 848

23

Calibrating the Scanner

 

Align the top edge of

the calibration sheet

with the dotted line

near the top of the

original holder

Align the side edges of

the calibration sheet

with the side edges of

the original holder

Figure 6: Positioning the white calibration sheet on the reflective holder

5.Click on Calibrate. The scanner will take several scans of the white target. The process will take about eight minutes.

English

User's Guide - Flextight 848

Image 23
Contents Users Guide Users Guide Flextight Table of Contents English Hardware Reference Flextight English System Requirements Hardware Reference Flextight Users Guide Flextight Front Panel Front panel features of FlextightBack panel features of Flextight Back Panel & ConnectorsCut-away view of Flextight Cut-Away ViewElectrical Requirements Setting up the ScannerEnvironmental Requirements Installation Procedure, FireWire Interface Operating the Flextight 848 scanner Operating Instructions English English Reflective holder, top Original Max. resolution ppi At full scanning width ResolutionsTrue Resolutions Calibrating the Scanner Focus Calibration Use procedure below to make Focus CalibrationSelect Focus Calibration from the Maintenance menu White Calibration for Reflectives Use procedure below to make White CalibrationAlign the top edge Replacing the Light Tubes Replacing the Light Tubes Follow procedure below to replace a tubeLight Tubes GeneralEnglish Disposal Cleaning the External Surface of the ScannerTechnical Specifications FCC Notice Declaration of conformity CE Declaration of conformity