Marantz VP-12S4 Initial Setting, Detail Focusing, Turning on the Power, Zooming and Focusing

Page 16

ENGLISH

	INITIAL SETTING		Detail Focusing

		You can strictly focus the image with focus pattern.
		You can strictly focus the image with focus pattern.
		1. Press the PATTERN button to project the focus pattern on the screen.

Turning on the Power

1.Connect the supplied AC power cord. (☞ P.8)

2.Press the ON button on the remote controller or the / I button on the projector. The ON indicator lights up.

STANDBYON

PATTERN

V-MUTE MENU

ENTER

STANDBYON

PATTERN

V-MUTE MENU

ENTER

2.Turn the Focus ring to make an adjustment.

Adjust the focus for the sharpest image possible to obtain, using focus pattern.

Zooming and Focusing

Project an image on the screen roughly at first.

1.Turn the Zoom ring and adjust to the desired size within the zoom range.

WIDE: Enlarges (zooms in) the projected image.

TELE: Reduces (zooms out) the projected image.

2.Turn the Focus ring until the image on the screen becomes clear.

3. Press the PATTERN button again to hide the focus pattern. This completes fine focusing.

Note :

Changing the Focus Pattern Color According to Lens Position (☞ P.14)

The focus pattern changes color depending on the lens position. There are two colors and they can

WIDE				be used for checking the quality of the projected image. The white focus pattern uses the highest

			1.	optical performance to maximize the sharpness of the projected image. To enjoy the highest
			1.	sharpness, it is recommended to position the lens within this range.

			2.	When the lens is shifted outside the aforementioned range, the focus pattern turns green. Rough
			2.
				focusing in this range looses image sharpness.
				Adjusting the zoom position from WIDE to TELE enhances sharpness even at the same lens

position. However, the focus pattern does not change when the zoom position is changed.

TELE

10

Image 16

Contents Model VP-12S4 User Guide Additional Safety Information Read Before Operating EquipmentWarranty Equipment Mains Working SettingForeword Retain Your Purchase ReceiptAVANT-PROPOS GarantieConserver L’ATTESTATION D’ACHAT Reglage DE L’ALIMENTATION Secteur DE L’APPAREILPrologo GarantiaGuarde SU Recibo DE Compra ImportanteIntrodução Guardar O Recibo DE CompraRegulação do Equipamento Conforme a Alimentação DA Rede Direitos DE AutorTable of Contents Warnung Heiss Important SafeguardsVorsicht Features AccessoriesProjector Layout and Functional Overview Adjust the picture focusFront and Top View Rear and Terminals View Bottom View Component Video in 1Remote Controller Input Input signal select Button P.15Remote Controller Operational Range Preparing the Remote ControllerConnection with AC Power Supply When making connections be sure toWhen pulling out a cable ConnectionAdvanced Connection ScreenExternal Controller HD-Video / Satellite Cable Tuner / DVD PlayerInitial Setting Detail FocusingTurning on the Power Zooming and FocusingAdjusting the Height Adjusting the Image PositionKeystone Correction Recommended Setting Installing on a tabletop Mounting on the ceilingScreen Size and Projection Distance inch VP-12S4 Screen Size and Projection Distance mm VP-12S416 9 Screen ScreenLens shift position About Extended mounting conditionsSelecting the Input Signal Source Selecting the Aspect ModeBasic Operations Screen Images in a 169 screenTo Turn off the Power Screen Images in a 43 screenOperations Menu StructureMemorizing settings in an index Picture Mode How to Operate MenusAdjustment bar Picture Adjust Fine Menu FRCInput Signal RGB/HD Adjust Display OSD/Blanking Configration Maintenance Lamp Life and Replace LampReplacing Lamp Unit Lamp LifeWarnung Heiss Color Temperature Adjustment Color Temperature Sensor ProtectionTroubleshooting Cleaning the LensReplacement Parts Optional AccessoriesError Mode On Screen MessageOptical characteristics AccessoriesTiming chart Input/OutputBlack Level Black setup GlossaryBottom FrontJapan Europe