CHAPTER 3
Operation and Maintenance
Navigational Basics
1.Unlock the Menu system by pressing the Menu 
button for a few seconds until the display goes to the
2.Use the left and right arrows 
on the
3.Stop at the desired menu and press the Enter 
button to select. The new option will not be stored unless the Enter button is pressed.
4.If there is another level of menu choices repeat Steps 2 and 3.
5.At the option or setting menu level, use the up and down arrows on the Navigation
button 
to scroll to the desired option or setting. The option flashes until the Enter button is pressed. Pressing the Enter button stores the new value for that option. Pressing the Menu button returns to the previous menu level without changing the value of an option.
6.Continue pressing the Menu button to move back up levels and exit the menu system.
Display in Menu Locked Mode
The Power Hub display panel gives access to the onboard Menu System. When the Menu System is in locked mode, the panel displays in large
Fixture Software Version
The software version loaded on the system can vary even between units purchased at the same time. Verifying/Uploading Catalyst Software on page 15 describes the procedures to ensure that all Roadster Orbital Head systems on the link are running the latest software.
System Configuration Type
The configuration type indicates the system’s modular setup.
DMX Start Channel
The DMX start channel is the first channel currently assigned to that fixture in its range of channels on a DMX link. For more information on DMX start channels, see Setting a DMX Start Channel on page 15.
Error Message Display
Errors are displayed in short
18 | Roadster Orbital Head System User Manual |