High End Systems Roadster Orbital Head System user manual Mounting the Power Hub

Page 20

CHAPTER 2
Setup and Configuration
3.	Remove the three existing
	projector M10 x 20mm hex bolts	B
	and lock washers (B).	B
4.	Retract projector foot (C) to	C
4.	Retract projector foot (C) to
	minimum height to accommodate
	the bracket.

5.Slide the bracket over the projector.

6.Insert the three provided spacers

(D) between the bracket and the projector

7.Reinstall the three hex bolts and washers (B) through the spacers.

8.If you are not using the lifter eyes on the projector for truss mounting, install the optional M12 x 35mm hex bolt, lock washer and flat washer (F) provided to secure the bracket to the projector.

Locking washer

Flat washer

F

D

B

Locking washer

Flat washer

Mounting the Power Hub

Attach one or two cheeseborough

clamps to the mounting bracket for Mounting bracket mounting on any standard truss. Use

safety cable to secure the Power Hub to an independent support.

Note: The Power Hub must be located within two meters of the projector head for correct performance.

10	Roadster Orbital Head System User Manual

Image 20

Contents Roadster Orbital Head System Contacting High End Systems US and the AmericasDeclaration of Conformity IiiProduct Modification Warning FCC InformationWarranty Information Important Safety InformationSymbols Page Table of Contents Mirror 2 Quick Path ViiiChannels Needed Page Orbital Movement System Features Chapter Product OverviewAccessories Part DescriptionMirror Head SpecificationsPhysical Specifications Power Hub Projector Lens OptionsRoadcase ChristieElectrical Specifications Environmental SpecificationsCable and Connector Specifications Power Hub to Christie Digital Projector ConnectionMirror Head to Power Hub Connection Installing Power Cord Caps Inspecting the FixtureSave All Shipping Materials HardwareInstalling a Line Cord Cap U.K. Only Vatic Fitter Heads Information DanmarkMounting the Orbital Head System SetupMounting Mounting the Power Hub Connecting the System Power Hub ConnectionsConnecting to a DMX512 Link Power Hub to ProjectorPower Hub to Orbital Head Connection Required Data Cabling and ConnectorsSetting Up a DMX Link XLR 5-pin connector cableConstructing a Terminator Data cable terminatorPowering On the System Before Applying PowerApplying Power Daisy-chaining Power Hubs in a DMX 512 linkSetting a DMX Start Channel Verifying/Uploading Catalyst SoftwareTo set the DMX start channel on the Power Hub Chapter Operation and Maintenance Power Hub Menu DisplayDisplay in Menu Locked Mode Navigational BasicsMenu Map Unlocking the Menu SystemExiting the Menu System Copies boot code to fixture Default safe settingPress Enter for 5 seconds to reset Scrolls through errors displayedSetting a DMX Start Channel DMX Address MenuSet Parameters Menu Display LevelFactory Default Settings Mirror 2 Quick PathCrossloading Fixture Software Fixture Mode MenuProtocol Mode Homing the Fixture Copying the Boot CodeTest Options Menu Self Test Menu Display Errors To Display ErrorsInformation Menu Channels NeededFixture Hours Reset Fixture HoursModule Version Menu Next DMX ChannelUnique Number Software VersionPower Hub Maintenance Replacing the Power Hub FuseReplacement Parts Cleaning the MirrorsChapter DMX Programming Terminology DMX ParametersMSpeed Motor Speed Control Function Control Option Description ShutterChan Function Description Value Default DMX Protocol TableDMX Programming Chapter Time Value Sec Time Value Sec DecDec Hex Appendix B Safety Information Appendice B Importantes Informations Sur La Sécurité Anhang B Wichtige Hinweise Für Ihre Sicherheit Warnung Zum Schutz Vor BrandgefahrApéndice B Información Importante De Seguridad Advertencia Para Protección Continua Contra IncendiosAppendice B Importanti Informazioni Di Sicurezza Vigtig SikkerhedsinformationChapter B Safety Information