High End Systems Roadster Orbital Head System System Setup, Mounting the Orbital Head

CHAPTER 2

Setup and Configuration

System Setup

Mounting

Warnings: Equipment suitable for dry locations only. Do not expose this equipment to rain or moisture.

Caution: If mirror surface needs to be cleaned during setup procedure, use only a mild glass cleaner (containing no ammonia) and a soft, lint-free cotton cloth to avoid scratching mirror surface.

The Roadster Orbital Head system ships with a mounting bracket adapted to the Christie Roadster S+12 or S+16 high output video projectors. The Orbital Head must be able to rotate freely. Choose from the recommended lens options to avoid impeding Orbital Head movement, (see Projector Lens Options on page 4).

Mounting the Orbital Head

To mount the Orbital Head to the projector:

1. Choose from the four available orientation options:

Standard 90 Degrees 270 Degrees 180 Degrees

2.Mount the bracket to the Orbital head using four M6 x 16mm hex bolts with lock washers and flat washers (A).

Flat washer Lock washer

Bolt

A

Roadster Orbital Head System User Manual 9