High End Systems Roadster Orbital Head System user manual Chapter Operation and Maintenance

Chapter 3:

Operation and Maintenance

This chapter discusses the onboard menu system for the Orbital Head System. For more information on operating the fixture with a controller, consult the controller documentation.

The Power Hub has an on-board menu system allows you to:

•Set a start channel

•Enable and disable default parameter settings

•View protocol type

•Crossload firmware

•Home the Mirror Head

•Test movement and sensor functions

•View current DMX values for all parameters

•View fixture number, software version, errors, channels needed, and next available DMX channel.

•Strike and douse the projector lamp

The Power Hub Menu Display

The front panel on the Power Hub component has a dot matrix display and six arrows on buttons that control navigation for the on-board menu system. The buttons are configured with the Menu button on the left and the Enter button on the right. The center button navigates through the current level of menu options [Left and Right] and values available for the current option [Up and Down].

Alpha numeric display	Menu system buttons
Use left and right arrows to move	Use up and down arrows to select
through the current	from available value or setting options.
menu level options

Use the Menu button (on the left		Use the Enter button (on the
when viewing the display) to unlock		right when viewing the display)
the menu and move back to the pre-	4-way Navigation button	to select the currently displayed
vious menu level		menu value or option.
Roadster Orbital Head System User Manual		17