Chapter 2:
Setup and Configuration
Inspecting the Fixture
The following components are shipped as the Roadster Orbital Head system:
Hardware
•Orbital Head fixture
•Power Hub
•Mounting Bracket for Christie projector
Cabling
•
•RS 232 cable
•US power cable
•European power cable
Unpack all components and verify that it is undamaged. Inspect both the outside of the components for physical damage and the optical surfaces of the Orbital Head. If the product is damaged or there are items missing, notify both the shipping agent and your sales agent immediately.
Save All Shipping Materials
Do not discard shipping materials. Packing materials are specifically designed to protect the product during transport.
High End Systems® assumes no responsibility for products that are damaged during transport. Return a product for repair in its original shipping carton and packing materials.
Before sending anything to the factory, call your High End Systems dealer/distributor for a Return Material Authorization (RMA) number. The factory cannot accept any goods shipped without an RMA number.
Installing Power Cord Caps
The Power Hub for the Orbital Head System may ship without an attached power cord cap. Different locations (even within the same country) may require a different power cord cap to connect the fixture to a power outlet.
Because of the variety of power cord caps used worldwide, High End Systems, Inc. cannot make specific recommendations for the power cord cap.
Roadster Orbital Head System User Manual | 7 |