vTurn on power saving features.
vSpecify blank screen colors and start up logos.
vSpecify the language viewed on the menus.
vSave settings for the active source as a preset.
Shutting down the projector
The projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen helps preserve the life of the projector. The image returns when an active source is detected or a remote or keypad button is pressed.
Screen Save
You can make the black screen appear after a preset number of minutes by turning on the Screen Save feature in the Settings>System menu. See “Settings menu” on page
Power Save
The projector also has a Power Save feature that automatically turns the lamp off after no active sources are detected and no user interaction with the projector is performed for 20 minutes. By default, this feature is off. See “Settings menu” on page
Turning off the projector
You can turn the projector off simply by toggling the power switch to the off position.
You can also press the remote’s Power button to place the projector in the Off state while it is running. When the Power button is pressed twice (once to start the
When the lamp has cooled, the LED lights solid green and the fans slow down to minimal speed. To turn off the projector, toggle the power switch to the off position.
Note: Once the projector has been toggled off, you must wait for one minute before turning the projector on again. This allows the lamp to properly cool. However, if the remote was used to power the projector to the Off state you do not need to wait one minute to turn it on again.