IBM Partner Pavilion iLV300 manual Advanced menu, Aspect Ratio menu

Figure 5-6. Aspect Ratio menu

For more information regarding Aspect Ratio, see “Connecting a video device” on page 3-1and “Picture menu” on page 5-2.

vPresets: Presets are provided that optimize the projector for displaying computer presentations, photographs, film images, and video images. Film input is material originally captured on a film camera, like a movie; video input is material originally captured on a video camera, like a TV show or sporting event. You can use the preset as a starting point, then further customize the settings for each source. The settings you customize are saved in the preset for each source. To restore the factory default settings, choose Factory Reset in the Settings>Service menu. For more information, see “Settings menu” on page 5-5.

There is also a user-definable preset. To set a preset for the current source, adjust the image, select Save Settings in the Presets menu, choose one of the locations in the Save Settings menu, and exit out of the menu. You can recall these settings in the future by selecting the User 1 preset. (See Figure 5-7.)

Figure 5-7. Presets and Save Settings menus

Advanced menu

vSharpness: (This menu is only for video sources.) Changes the clarity of the edges of a video image. Select a sharpness setting from the Sharpness menu, shown in Figure 5-8.

Figure 5-8. Sharpness menu

Chapter 5. Using the menus 5-3