–NND prevents your notebook computer from going into Screen Save mode if the USB cable is connected.
–Power Save automatically turns the lamp off after no signals are detected for 20 minutes. After an additional 10 minutes with no signal, the projector powers down and can be toggled off. If an active signal is received before the projector powers down, the image will be displayed. When Power Save is enabled, Screen Save is disabled.
–Screen Save automatically blanks the screen with a black color after no signals are detected for a preset number of minutes. The image returns when an active source is detected or a remote or keypad button is pressed.
Figure 5-15 shows the Screen Save menu.
Figure 5-15. Screen Save menu
vStartup Logo: Enables you to display a blank screen instead of the default screen at startup, and when no source is detected. Figure
Figure 5-16. Startup Logo menu
vBlank Screen: Determines what color is displayed when you press the Blank button on the remote. Figure
Figure 5-17. Blank Screen menu
vEffect Key: Enables you to assign a different function to the Effect button on the remote by highlighting a function and pressing Select. Figure