JVC PC007182399-1 warranty Connecting via PC Cable, Connecting via Trigger Cable, This unit Screen

Page 20

2 Preparation

Connecting(Continued)

Connecting via PC Cable

This unit

Notebook PC

To PC input terminal

PC cablesold separately

VGA output terminal

 

For information on supported input signals, please refer to “Specifications” . (P58)

Connecting via Trigger Cable

This unit

Screen

SYNC

To Trigger output terminal

CAUTION

Trigger cable

(sold separately)

 

Trigger input terminal

 

(Φ3.5)

Do not supply the power to the other devices.

Do not connect audio terminals of the other devices such as

headphones etc. Otherwise, this may cause a malfunction of the other devices or injury.

Using beyond the rated value will cause malfunction.

Exercise adequate caution to prevent short circuit as the trigger terminal outputs a voltage of 12V.

20

Image 20
Contents DLA-HD950/DLA-HD990 Safetyf ty PrecautionsPrecautions About the installation placeFCC Information U.S.A. only Machine Noise Information Germany onlyDo not allow any unqualified person to install the unit EnglishPower cord Important Europe onlyBattery Products Batterie ProduktePile Produits Batterij ProductenBaterías/pilas Productos Batteria ProdottiPilha Produtos Μπαταρία ΠροϊόνταBatteri Produkter Akku TuotteetБатарея Изделия Baterie ProduktyBateria Produkty Akkumulátor TermékekTHX Certification THX CertificationContents Check the Accessories Optional AccessoriesAbout this Manual Conventions in this manualRear Side/Top Side/Right Side Controls and featuresFront Side/Left Side Preparation Basic Operation Bottom SurfaceControls and features Remote ControlHow to Use the Remote control Effective Range of Remote Control UnitWhen directing the remote control toward this unit When reflecting off a screenSelecting Connecting Devices PreparationConnecting Connecting via Video Cable and S-Video CableConnecting via Component Video Cable This unitConnecting via HDMI-DVI Conversion Cable ConnectingConnecting via Hdmi Cable Connecting via SCART-RCA Cable Connecting via RGB Video CableRGB video output terminals This unit BD/DVD player for European marketThis unit Screen Connecting via PC CableConnecting via Trigger Cable Installing the Projector and Screen Set AngleShift Left/Right positionInstalling the Projector and Screen Screen Size and Projection DistanceMemo Insert the power plug to the power outlet Turn on the powerAdjusts image focus, size zoom, and position shift Projecting ImageTurn off the power About Cool Down modeYou can hide the image temporarily Focus Zoom ShiftMasking the Surrounding Area of an Image Convenient Features during ProjectionSetting the Screen Size Mask the image To endInput Signal Structure of the Settings menuPicture Adjust Installation Display SetupFunction InformationSetting Menu Procedures for Menu OperationDisplay the setting menu Select Input Signal AspectVideoSetting Menu Setting Menu Picture Adjust Color TempPicture Adjust Gamma Custom AdjustmentValue Custom Gamma CopyAll Reset SharpnessDetail EnhancementPicture Adjust Lens Aperture Input Signal HdmiInput Signal Comp Input Signal Video/S-VideoInput Signal PC Input Signal Picture PositionInput Signal Over Scan Input Signal Aspect VideoInput Signal Aspect Computer Input Signal Mask Input Signal Film ModeInstallation Lens Control Installation Pixel AdjustInstallation Installation Style Installation KeystoneInstallation Screen Adjust Display Setup Back ColorDisplay Setup Line Display Display Setup Source DisplayDisplay Setup Logo Display Setup LanguageFunction Off Timer Function High Altitude ModeHigh Altitude Mode Function TriggerChanging the Initial Setting Picture Mode Select picture modeAdjust picture quality Other items can also be adjusted To endRegistering User-defined Picture Mode Select the picture mode Adjust picture qualityRegistering User-defined Picture Mode from the Menu Select Picture Adjust Picture Mode NaturalTroubleshooting TroubleshootingIs the setup of Control with Hdmi Is the image correctly adjusted?Has setting been performed for Are batteries installed correctly?What to Do When these Messages Are Displayed Message Cause DetailsAbout Warning Indicators Actions to Be Taken for Warning ModeIndicator Blinking Interval No. Warning Between Content Time FrequencyReplacing the Lamp Remove the lamp coverLoosen the screws on the lamp unit Pull out the lamp unitInstall the new lamp unit Tighten the screws of the new lamp unitAttach the lamp cover Tighten the screws with a screwdriverResetting Lamp Time Replacing the LampCleaning and Replacing the Filter Clean the filterReinstall the inner filter If the filter is damaged or too dirty to be cleanedRS-232C Interface RS-232C SpecificationsCommand Format End Command and dataCommand Type Data description Binary code Remote control codeRS-232C Interface Operating command Type Command DescriptionReference command RS-232C Communication ExamplesCopyright and Caution About Trademarks and CopyrightDirt on the cabinet Dirt in the air inletsPrecautions for Mounting Mounting this UnitSpecifications PC compatible signals PolarityNo. EffectiveSpecifications Top Surface Bottom SurfaceFront Back SurfaceIndex Memo