JVC PC007182399-1 warranty Install the new lamp unit, Tighten the screws of the new lamp unit

Page 49

4 Install the new lamp unit

Handle

5 Tighten the screws of the new lamp unit

●Tighten the screws with a screwdriver.

6 Attach the lamp cover

●Insert the top part (with 2 claws) of the lamp cover into the unit.

●Fasten the screws with a screwdriver.

ENGLISH

CAUTION

●Use only genuine replacement parts for the lamp unit. Also, never attempt to reuse an old lamp unit. This may cause a malfunction.

●Do not touch the surface of a new lamp. This may shorten the lamp life and cause lamp blowout.

MEMO

After Replacing the Lamp

●Do not place the removed lamp unit at locations that is reachable by children or near combustible items.

●Dispose used lamp units in the same way as fluorescent lamps. Follow your local community rules for disposal.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

Image 49

Contents DLA-HD950/DLA-HD990 About the installation place Safetyf ty PrecautionsPrecautionsFCC Information U.S.A. only Machine Noise Information Germany onlyEnglish Do not allow any unqualified person to install the unitImportant Europe only Power cordBatterie Produkte Battery ProductsPile Produits Batterij ProductenBatteria Prodotti Baterías/pilas ProductosPilha Produtos Μπαταρία ΠροϊόνταAkku Tuotteet Batteri ProdukterBaterie Produkty Батарея ИзделияBateria Produkty Akkumulátor TermékekTHX Certification THX CertificationContents Optional Accessories Check the AccessoriesAbout this Manual Conventions in this manualFront Side/Left Side Controls and featuresRear Side/Top Side/Right Side Bottom Surface Preparation Basic OperationRemote Control Controls and featuresEffective Range of Remote Control Unit How to Use the Remote controlWhen directing the remote control toward this unit When reflecting off a screenPreparation Selecting Connecting DevicesConnecting via Video Cable and S-Video Cable ConnectingConnecting via Component Video Cable This unitConnecting via Hdmi Cable ConnectingConnecting via HDMI-DVI Conversion Cable Connecting via RGB Video Cable Connecting via SCART-RCA CableRGB video output terminals This unit BD/DVD player for European marketConnecting via Trigger Cable Connecting via PC CableThis unit Screen Set Angle Installing the Projector and ScreenShift Left/Right positionScreen Size and Projection Distance Installing the Projector and ScreenMemo Turn on the power Insert the power plug to the power outletAdjusts image focus, size zoom, and position shift Projecting ImageAbout Cool Down mode Turn off the powerYou can hide the image temporarily Focus Zoom ShiftSetting the Screen Size Convenient Features during ProjectionMasking the Surrounding Area of an Image To end Mask the imagePicture Adjust Structure of the Settings menuInput Signal Display Setup InstallationFunction InformationProcedures for Menu Operation Setting MenuDisplay the setting menu Select Input Signal AspectVideoSetting Menu Picture Adjust Color Temp Setting MenuCustom Adjustment Picture Adjust GammaValue Custom Gamma CopySharpness All ResetDetail EnhancementInput Signal Hdmi Picture Adjust Lens ApertureInput Signal Video/S-Video Input Signal CompInput Signal PC Input Signal Picture PositionInput Signal Aspect Computer Input Signal Aspect VideoInput Signal Over Scan Input Signal Film Mode Input Signal MaskInstallation Lens Control Installation Pixel AdjustInstallation Keystone Installation Installation StyleInstallation Screen Adjust Display Setup Back ColorDisplay Setup Source Display Display Setup Line DisplayDisplay Setup Logo Display Setup LanguageFunction High Altitude Mode Function Off TimerHigh Altitude Mode Function TriggerSelect picture mode Changing the Initial Setting Picture ModeAdjust picture quality Other items can also be adjusted To endSelect the picture mode Adjust picture quality Registering User-defined Picture ModeRegistering User-defined Picture Mode from the Menu Select Picture Adjust Picture Mode NaturalTroubleshooting TroubleshootingIs the image correctly adjusted? Is the setup of Control with HdmiHas setting been performed for Are batteries installed correctly?Message Cause Details What to Do When these Messages Are DisplayedActions to Be Taken for Warning Mode About Warning IndicatorsIndicator Blinking Interval No. Warning Between Content Time FrequencyRemove the lamp cover Replacing the LampLoosen the screws on the lamp unit Pull out the lamp unitTighten the screws of the new lamp unit Install the new lamp unitAttach the lamp cover Tighten the screws with a screwdriverReplacing the Lamp Resetting Lamp TimeClean the filter Cleaning and Replacing the FilterReinstall the inner filter If the filter is damaged or too dirty to be cleanedCommand Format RS-232C SpecificationsRS-232C Interface Command Type Data description Command and dataEnd RS-232C Interface Remote control codeBinary code Type Command Description Operating commandReference command RS-232C Communication ExamplesAbout Trademarks and Copyright Copyright and CautionDirt on the cabinet Dirt in the air inletsMounting this Unit Precautions for MountingSpecifications Polarity PC compatible signalsNo. EffectiveTop Surface Bottom Surface SpecificationsFront Back SurfaceIndex Memo