JVC PC007182399-1 warranty Picture Adjust Lens Aperture, Input Signal Hdmi

ENGLISH

* About “Color Management Adjustment”
1	Set the picture mode of the color management.
2	Select the color to be adjusted by color management.	3 Select color adjustment.

Picture Adjust Picture Adjust

> Color Management > Color Management

Off	Pause	Off			Off	Pause	Off
Custom1	Red				Custom1	Red
Custom2	Yellow				Custom2	Yellow
Custom3	Green				Custom3	Green
	Cyan					Cyan
	Blue					Blue
	Magenta					Magenta
	All Reset					All Reset
	Hue	0				Hue	0
	Saturation	0				Saturation	0
	Brightness	0				Brightness	0
Exit	Operate	Back	Check	Before	Exit	Operate	Back	Check	Before
MENU Select		BACK	TEST		MENU Select		BACK	TEST

4	Select the “Hue”, “Saturation” or “Brightness” using the				/	button.
5	Use the	/	button to adjust.
	Hue	7	Check	After
			TEST
● You can switch between “Before” and “After” using the [TEST] button of the remote control.
6	To end

BACK	BACK	BACK	Save Color Management?		OK
			Yes
				No

●After selecting “Cinema 1”, “Cinema 2”, or “Cinema 3” from “Picture Mode”, and after adjusting “Advanced”, adjustment of brightness in each “Color Management” mode is not possible.

Picture Adjust > Lens Aperture

09Lens Aperture

(Dark) -15 to 0 (Bright)

10Reset

Reset the setting.

Input Signal > HDMI

11HDMI

Configures HDMI input signal.

	Auto	Automatically configures the input signals.
Input	Standard	Select this when the dynamic range of the input images is
		16-235.
	Enhanced	Select this when the dynamic range of the input images is
		0-255.
	Auto	Automatically configures the input signals.
	YCbCr(4:4:4)	Select this when the Y Cb Cr(4:4:4) video signals are
Color Space		input.
	YCbCr(4:2:2)	Select this when the Y Cb Cr(4:2:2) video signals are
		input.
	RGB	Select this when the RGB video signals are input.
Control with HDMI	On	Enables CEC communications.
	Off	Disables CEC communications.

●The setting is available only if the HDMI terminal is selected.

●For some source devices,“Auto (input)” will not function properly. In such cases, please use Standard Mode or Enhanced Mode.

●Abbreviation

CEC: Consumer Electronics Control

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

35