JVC PC007182399-1 warranty Replacing the Lamp, Resetting Lamp Time

Page 50

5 Troubleshooting

Replacing the Lamp (Continued)

STAND BY	ON
INPUT
HDMI 1 HDMI 2	COMP.

VIDEO S-VIDEO PC

LENS ASPECT HIDE

TESTLIGHT

MENUBACK

Resetting Lamp Time

After replacing the lamp, reset the lamp time.

1 Insert the power plug to the power outlet

Light on (Red)

2 Must operate with the remote control in the standby mode (the projector is powered, but is not turned on).

●Press in the order as shown.

●Press each button within 2-second intervals and press the last button for 2 seconds or more.

PICTURE MODE

CINEMA	CINEMA	CINEMA
1	2	3
NATURAL	STAGE	DYNAMIC
USER1	USER2	THX

GAMMA C.TEMP LENS. PIC.

AP. ADJ.

WARNING

LAMP

STANDBY/ON

BACK

OK

HIDE

Press for 2 seconds or more

●[STANDBY/ON] indicator and [LAMP] indicator blink alternately for 3 seconds. After that, the unit switches to standby mode.

CAUTION

●Reset the lamp time only when you have replaced the lamp.

●Never reset the service time when the lamp is still in use. Otherwise, the approximate standard for gauging replacement time may be inaccurate and lamp blowout may occur.

50

Image 50

Contents DLA-HD950/DLA-HD990 FCC Information U.S.A. only Safetyf ty PrecautionsPrecautionsAbout the installation place Machine Noise Information Germany onlyDo not allow any unqualified person to install the unit EnglishPower cord Important Europe onlyPile Produits Battery ProductsBatterie Produkte Batterij ProductenPilha Produtos Baterías/pilas ProductosBatteria Prodotti Μπαταρία ΠροϊόνταBatteri Produkter Akku TuotteetBateria Produkty Батарея ИзделияBaterie Produkty Akkumulátor TermékekTHX Certification THX CertificationContents About this Manual Check the AccessoriesOptional Accessories Conventions in this manualRear Side/Top Side/Right Side Controls and featuresFront Side/Left Side Preparation Basic Operation Bottom SurfaceControls and features Remote ControlWhen directing the remote control toward this unit How to Use the Remote controlEffective Range of Remote Control Unit When reflecting off a screenSelecting Connecting Devices PreparationConnecting via Component Video Cable ConnectingConnecting via Video Cable and S-Video Cable This unitConnecting via HDMI-DVI Conversion Cable ConnectingConnecting via Hdmi Cable RGB video output terminals Connecting via SCART-RCA CableConnecting via RGB Video Cable This unit BD/DVD player for European marketThis unit Screen Connecting via PC CableConnecting via Trigger Cable Shift Installing the Projector and ScreenSet Angle Left/Right positionInstalling the Projector and Screen Screen Size and Projection DistanceMemo Adjusts image focus, size zoom, and position shift Insert the power plug to the power outletTurn on the power Projecting ImageYou can hide the image temporarily Turn off the powerAbout Cool Down mode Focus Zoom ShiftMasking the Surrounding Area of an Image Convenient Features during ProjectionSetting the Screen Size Mask the image To endInput Signal Structure of the Settings menuPicture Adjust Function InstallationDisplay Setup InformationDisplay the setting menu Setting MenuProcedures for Menu Operation Select Input Signal AspectVideoSetting Menu Setting Menu Picture Adjust Color TempValue Custom Gamma Picture Adjust GammaCustom Adjustment CopyDetail All ResetSharpness EnhancementPicture Adjust Lens Aperture Input Signal HdmiInput Signal PC Input Signal CompInput Signal Video/S-Video Input Signal Picture PositionInput Signal Over Scan Input Signal Aspect VideoInput Signal Aspect Computer Installation Lens Control Input Signal MaskInput Signal Film Mode Installation Pixel AdjustInstallation Screen Adjust Installation Installation StyleInstallation Keystone Display Setup Back ColorDisplay Setup Logo Display Setup Line DisplayDisplay Setup Source Display Display Setup LanguageHigh Altitude Mode Function Off TimerFunction High Altitude Mode Function TriggerAdjust picture quality Changing the Initial Setting Picture ModeSelect picture mode Other items can also be adjusted To endRegistering User-defined Picture Mode from the Menu Registering User-defined Picture ModeSelect the picture mode Adjust picture quality Select Picture Adjust Picture Mode NaturalTroubleshooting TroubleshootingHas setting been performed for Is the setup of Control with HdmiIs the image correctly adjusted? Are batteries installed correctly?What to Do When these Messages Are Displayed Message Cause DetailsIndicator Blinking Interval No. Warning Between Content About Warning IndicatorsActions to Be Taken for Warning Mode Time FrequencyLoosen the screws on the lamp unit Replacing the LampRemove the lamp cover Pull out the lamp unitAttach the lamp cover Install the new lamp unitTighten the screws of the new lamp unit Tighten the screws with a screwdriverResetting Lamp Time Replacing the LampReinstall the inner filter Cleaning and Replacing the FilterClean the filter If the filter is damaged or too dirty to be cleanedRS-232C Interface RS-232C SpecificationsCommand Format End Command and dataCommand Type Data description Binary code Remote control codeRS-232C Interface Reference command Operating commandType Command Description RS-232C Communication ExamplesDirt on the cabinet Copyright and CautionAbout Trademarks and Copyright Dirt in the air inletsPrecautions for Mounting Mounting this UnitSpecifications No. PC compatible signalsPolarity EffectiveFront SpecificationsTop Surface Bottom Surface Back SurfaceIndex Memo