JVC PC007182399-1 Installing the Projector and Screen, Set Angle, Shift, Left/Right position

ENGLISH

Installing the Projector and Screen

While installing, please place this unit and the screen perpendicular to each other. Failing to do so may increase trapezoidal distortion. Please refer to “Keystone”. ( P39 - 25 )

Set Angle

● The angle range which can be set for this unit is ±10°.

10°	10°
10°	10°

● Malfunctions may occur if the angle is not set within the above-mentioned range.

Shift

■Left/Right position

*0% up/down position (center)

Approximately 34% (maximum) of the projected image

	Approximately 34% (maximum) of
■ Up/Down position	the projected image
	■ Shifting range of projected image

* 0% left/right position (center)

Getting Started

Preparation

Basic Operation

Settings

34%

Approximately 80% (maximum) of the projected image

80%

34%

Lens center

80%

Troubleshooting

				Approximately 80% (maximum) of
				the projected image
Lens shift correlation chart:
Left-Right Shift(%)	0%	5%	10%	15%	20%	25%	30%	34%
Up-Down Shift(%)	80%	74%	66%	57%	47%	34%	18%	0%

●Maximum Up-Down shift varies with the amount of Left-Right shift. Likewise, maximum Left-Right shift varies with the amount of Up-Down shift.

●The values on the chart are intended to act as a guide. Use them for reference during installation.

Others

21