JVC TM-H150CG manual Preparation, Installing the Input Card, Slot cover

Page 10

Preparation

Installing the Input Card

1 Turn off the main power switch on the rear panel of the monitor and unplug the AC power cord from the AC outlet.

2 Unscrew the screws and remove the slot cover from the input card slot on the rear panel of the monitor.

REMOTE

MAKE/

TRIGGER

SLOT

Slot cover

3 Insert the input card’s circuit board (green-colored) into the slot, fitting the board to the guide rails on the top and bottom of the slot.

Hold the tabs on the input card when inserting the input card.

 

Fit the board to the guide rails.

NOTE:

When installing IF-C21SDG/IF-C51SDG, you need to set the

DIP switches on the input card correctly to use the functions

of the input card. Refer to the instruction manual supplied with

SLOT

the input card and set the DIP switches beforehand.

REMOTE

Tab

Guide rails

Tab

Input card (This illustration is IF-C01COMG.)

4 Push in the input card so that its front panel touches the rear panel of the monitor. 5 Secure the Input Card by using the screws removed in step 2.

SLOT

REMOTE

MAKE/

TRIGGER

NOTES:

•The input card or the monitor may be damaged if you do not turn off the main power of the monitor before installing the input card.

•Do not touch the terminals or the patterns on the circuit board of the input card.

•Attach the slot cover when the input card slot is not in use.

ENGLISH

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents TM-H150CG TM-H150CG Safety Precautions FCC Information U.S.A. onlyContents Controls and Features Front PanelStand-by button Power lampAspect button Speaker Controls and Features cont’d Rear PanelComponent/RGB Input Card IF-C01COMG Input Card optionSDI Input Card IF-C01SDG Input Card option cont’d Audio signal output terminalSDI Input Card IF-C21SDG/IF-C51SDG Slot cover Installing the Input CardPreparation Tab Guide rails Input card This illustration is IF-C01COMGAbout the Menu Screens Basic Menu OperationsItems Functions Initializing the Settings Menu Operation ProcedureDisplaying the menu screens How to Use Menu Function, Contents, and the Adjustment Range of Each ItemPicture SUB ADJ How to Use SET-UP MenuPosition How to Use SET-UP Menu cont’d About the External Control How to Use the External ControlHow to Use the Remote Terminal OperationTroubleshooting Position Following are not malfunctionsWrong picture Front panel buttonsSpecifications C Mini DIN 4 pin terminals DimensionsAcceptable Signal Formats ‡ Acceptable Not acceptableMonitor
Top Page Image Contents