JVC TM-H150CG manual How to Use SET-UP Menu, Picture SUB ADJ, Position

How to Use SET-UP MENU

Function and display of the button varies depending on the selected item.

<SET-UP MENU>

PICTURE SUB ADJ.
H. POSITION	:	00
V. POSITION	:	00
WHITE BALANCE
CONTROL LOCK	: OFF
STATUS DISPLAY	: ON
REMOTE SYSTEM	: MAKE
INPUT REMOTE	: A-D

EXIT

Buttons	Displays	Functions
fi	∞	Selects the items in forward rotation.
%	5	Selects the items in reverse rotation.
VOLUME/	+	Increases the value (up to the maximum).
SELECT(+)	3	Selects the setting (value) in forward rotation.
VOLUME/	–	Decreases the value (up to the minimum).
SELECT(–)
	2	Selects the setting (value) in reverse rotation.
MENU	EXIT	Returns to or exits from SET-UP MENU.

			When setting “WHITE BALANCE”:
			Buttons	Displays	Functions
CHROMA CONTRAST		VOLUME/SELECT	MENU	R•B	Selects the color to adjust the drive level.
			fi
				R•G•B	Selects the color to adjust the cut-off point.
PHASE	BRIGHT
			%	DISP	Turns on/off the on screen display.
			VOLUME/	CUTO	Adjusts the cut-off point.
			SELECT(+)	+	Increases the value (up to the maximum).
			VOLUME/	DRV	Adjusts the drive level.
			SELECT(–)	–	Decreases the value (up to the minimum).
			MENU	EXIT	Returns to SET-UP MENU.

7Function, Contents, and the Adjustment Range of Each Item

ENGLISH

PICTURE SUB ADJ.

The standard value (“00”) of

the picture adjustment is	<PICTURE SUB ADJ.>
	CONTRAST	:	00
initially set at the factory. You	BRIGHT	:	00
	CHROMA	:	00
can adjust the standard value	PHASE	:	00
as your initial setting.
• Select “PICTURE SUB ADJ.”		EXIT
on SET-UP MENU, then
press the VOLUME/SELECT

(+)button to display the setting menu illustrated on the right.

NOTES:

•You can adjust the items in “PICTURE SUB ADJ.” separately for each video input. Select the video input you want to adjust beforehand.

•Only “CONTRAST” and “BRIGHT” appear on the screen when the RGB signal is input. When the signal with PAL color system is input, “PHASE” does not appear.

7CONTRAST

•–10 “ 00 “ +10

7BRIGHT

•–10 “ 00 “ +10

7CHROMA

•–10 “ 00 “ +10

7PHASE

•–10 “ 00 “ +10

H. POSITION

Adjusts the horizontal position of the screen.

NOTE:

You can adjust “H. POSITION” separately for each video input. Select the video input you want to adjust beforehand.

•–05 “ 00 “ +05

–: Moves the screen to the left.

+: Moves the screen to the right.

V. POSITION

Adjusts the vertical position of the screen.

NOTE:

You can adjust “V. POSITION” separately for each video input. Select the video input you want to adjust beforehand.

•–05 “ 00 “ +05

–: Moves the screen downward.

+: Moves the screen upward.

13