JVC TM-H150CG manual Aspect button, Power lamp, Stand-by button, Speaker

Page 6

7BLUE CHECK button Displays only the blue signals.

•The button lights while this function is activated.

•Pressing the button again restores the normal screen.

By using this function with the standard color-bar currently used, you can check if CHROMA (picture color density) or PHASE (picture hue) is adjusted properly.

Also you can check if “COMPO. LEVEL” (the adjustment level of the component signal) is adjusted properly for the component signal or the SDI signal.

NOTE:

This function is not available to the RGB signal.

1Display the standard color-bar currently used on the screen.

2Press the BLUE CHECK button.

The following display appears on the screen.

Blue

 

Blue

 

Blue

 

Blue

 

 

 

 

 

 

 

3If the brightness of the blue bars on the left and right sides are the same, CHROMA (picture color density) is adjusted properly.

•For the component signal or the SDI signal, if the brightness of the blue bars on the left and right sides are the same, “COMPO. LEVEL” is adjusted properly.

4If the brightness of two blue bars in the middle are the same, PHASE (picture hue) is adjusted properly.

•PHASE should be checked only when the NTSC signal is being input.

If the brightness of each blue bar is different, make the following adjustment in the blue checking state:

When the composite signal or the Y/C (S-video) signal is being input:

By using the CHROMA/PHASE button and the VOLUME/SELECT

(– +) buttons, adjust CHROMA or PHASE so that brightness of the blue bars on the left and right sides are the same.

When the component signal or SDI signal is being input:

Press the MENU button to display MENU, select “COMPO. LEVEL” by pressing the %/fi buttons.

Then, adjust “COMPO. LEVEL” by pressing the VOLUME/SELECT (– +) buttons so that brightness of two blue bars in the middle are the same.

•Be sure to adjust CHROMA for the composite signal or the Y/C (S-video) signal before adjusting “COMPO. LEVEL.”

If you change the CHROMA adjustment for other signal formats than the component signal after “COMPO. LEVEL” has been adjusted, you need to adjust “COMPO. LEVEL” again.

8ASPECT button

Changes the aspect ratio from 4:3 to 16:9.

•The button lights while the aspect ratio is 16:9.

•Pressing the button again returns the aspect ratio to 4:3.

9INPUT SELECT buttons Select an input to display.

A:Select the video signal input to the VIDEO A terminal and the audio signal input to the AUDIO A terminal.

B:Select the video signal input to the VIDEO B terminal and the audio signal input to the AUDIO B terminal.

\When both an Y/C (S-video) signal and a composite signal are input to the VIDEO B terminal, the Y/C signal has priority over the composite signal.

C/D (SLOT):

Select the signal input to the input card installed in the input card slot on the rear panel.

\For details about how to select the input signal through the input card, see pages 7 and 8.

•The corresponding button of the input currently selected lights up.

pPower lamp

Unlit: The main power is off.

Orange: The main power is on and the monitor is in stand- by mode.

Green: The monitor is on.

qStand-by button

Turns on and off the monitor when the main power is on.

NOTE:

You can set the delay time between when the stand-by button is pressed and when the monitor actually turns on. See “RUSH DELAY” on page 12.

wSpeaker

A built-in speaker is on the side panel.

ENGLISH

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents TM-H150CG TM-H150CG Safety Precautions FCC Information U.S.A. onlyContents Controls and Features Front PanelStand-by button Power lampAspect button SpeakerControls and Features cont’d Rear PanelInput Card option Component/RGB Input Card IF-C01COMGSDI Input Card IF-C01SDG Audio signal output terminal Input Card option cont’dSDI Input Card IF-C21SDG/IF-C51SDG Slot cover Installing the Input CardPreparation Tab Guide rails Input card This illustration is IF-C01COMGBasic Menu Operations About the Menu ScreensItems Functions Menu Operation Procedure Initializing the SettingsDisplaying the menu screens How to Use Menu Function, Contents, and the Adjustment Range of Each ItemHow to Use SET-UP Menu Picture SUB ADJPosition How to Use SET-UP Menu cont’d About the External Control How to Use the External ControlHow to Use the Remote Terminal OperationTroubleshooting Position Following are not malfunctionsWrong picture Front panel buttonsSpecifications C Mini DIN 4 pin terminals DimensionsAcceptable Signal Formats ‡ Acceptable Not acceptableMonitor

TM-H150CG specifications

The JVC TM-H150CG is a compact, high-performance 15-inch color monitor designed primarily for professional broadcasting, editing, and studio environment applications. Renowned for its robust construction and vivid display capabilities, the TM-H150CG has been a trusted choice among professionals in the industry.

One of the standout features of the TM-H150CG is its high-resolution display, capable of delivering a sharp image with excellent color reproduction. With a resolution of 1024x768 pixels, this monitor ensures that users can view intricate details in video content, making it suitable for critical viewing tasks. The display utilizes advanced CRT technology, known for its ability to produce deep blacks and vibrant colors, which is crucial in color grading and editing processes.

The TM-H150CG offers versatile input options, supporting a range of video formats including composite, S-Video, Y/C, and component signals. This flexibility allows users to connect various devices and cameras seamlessly, enhancing workflow efficiency in broadcast environments. The monitor's ability to handle different signal types makes it ideal for users who work across multiple platforms and equipment.

Another key feature of this monitor is its built-in speaker system, providing audio output alongside the video feed. This feature is particularly beneficial for on-set monitoring, allowing sound and picture to be evaluated together without the need for additional external speakers. The monitor's sound performance complements its visual quality, making it a truly versatile tool for video production.

In terms of ergonomics, the JVC TM-H150CG is designed for ease of use in demanding environments. It includes adjustable tilt for optimal viewing angles and a compact footprint that allows it to fit into various setups, whether in a control room or on-location. Its sturdy build ensures durability, making it reliable in studio and live settings.

Overall, the JVC TM-H150CG stands out due to its combination of exceptional display quality, versatile connectivity, and practical design. Its proven track record in the broadcasting field makes it a go-to monitor for professionals seeking reliability and performance in their monitoring solutions. Whether used for live production, video editing, or simple playback, the TM-H150CG continues to meet the high standards required by industry experts.
Top Page Image Contents