JVC TM-H150CG Displaying the menu screens, Menu Operation Procedure, Initializing the Settings

7Displaying the menu screens

To display MENU

Press the MENU button on the front panel.

To display SET-UP MENU

Press the fibutton while holding down the MENU button on the front panel.

•To go back to the previous menu, press the MENU button.

•To exit from the menu screen, press the MENU button several times.

NOTE:

The menu screen will disappear if no operation has been done for about 5 minutes.

7Menu Operation Procedure

Example: When adjusting “APERTURE” to “+10.”

1 Press the MENU button.

MENU appears on the screen.

	<MENU>
APERTURE			: 00
ADJ. BAR POSI.			: LOWER
COLOR TEMP.			: 9300
COLOR SYSTEM			: AUTO
COMPO. LEVEL			: 00
RUSH DELAY			: STD.
		EXIT

2 Press the %/fi button to select “APERTURE.”

	<MENU>
APERTURE			: 00
ADJ. BAR POSI.			: LOWER
COLOR TEMP.			: 9300
COLOR SYSTEM			: AUTO
COMPO. LEVEL			: 00
RUSH DELAY			: STD.
		EXIT

3 Press the VOLUME/SELECT (– +)

buttons to adjust “APERTURE.”

	<MENU>
APERTURE			: +10
ADJ. BAR POSI.			: LOWER
COLOR TEMP.			: 9300
COLOR SYSTEM			: AUTO
COMPO. LEVEL			: 00
RUSH DELAY			: STD.
		EXIT

4 Press the MENU button to exit from MENU.

7Initializing the Settings

You can initialize the following settings of the monitor:

MENU, SET-UP MENU, picture adjustment, volume level

1 Press the stand-by button to turn off the monitor (on stand-by).

2 While holding down both the MENU button and the fibutton, press the stand- by button to turn on the monitor.

NOTE:

Keep pressing both the MENU button and the fi button until “<SET-UP MENU> RESET” appears on the screen.

“<SET-UP MENU> RESET” appears on the screen.

3 Press the VOLUME/SELECT (+) button to initialize the settings.

The settings are initialized and “<SET-UP MENU> RESET” disappears.

•To cancel to initialize, press the MENU button.

Initial settings

	Functions (Items)	Initial settings
	APERTURE	00
	ADJ. BAR POSI.	LOWER
MENU	COLOR TEMP	9300
	COLOR SYSTEM	AUTO
	COMPO. LEVEL	00
	RUSH DELAY	STD.
	PICTURE SUB ADJ.
	CONTRAST	00
	BRIGHT	00
	CHROMA	00
	PHASE	00
	H. POSITION	00
	V. POSITION	00
	WHITE BALANCE
SET-UP MENU	R. CUTOFF	00
	G. CUTOFF	00
	B. CUTOFF	00
	R. DRIVE	00
	B. DRIVE	00
	CONTROL LOCK	OFF
	STATUS DISPLAY	ON
	REMOTE SYSTEM	MAKE
	INPUT REMOTE	A-D
	CHROMA	00
Picture	PHASE	00
Adjustment	CONTRAST	00
	BRIGHT	00
Volume	VOLUME	20

ENGLISH

11