JVC DT-V20L3G, DT-V24G1 Setting of Area MARKER, Safety MARKER, R-AREA Marker, MARKER*1*2

Page 13

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “AREA MARKER”, “SAFETY MARKER”, “R-AREA MARKER”,

“R-SAFETY MARKER”

The setting values and features are as follows.

OFF: Deactivate the marker.

LINE: Displays the area with an outline.

HALF: The area outside the specified aspect ratio of the screen is displayed at 50% transparency.

HALF+L: The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that is displayed at 50% transparency.

BLK.: The area outside the specified aspect ratio of the screen is black. Only the portion of the picture within the designated area is displayed.

BLK. +L: The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that becomes black so that only the area inside the line is displayed.

MARKER*1*2

Settings for marker functions 1/2

Item

To do

Setting value

AREA MARKER*3

Activate/deactivate the area marker and select the

☞ “NOTE”

 

style of it.

 

MARKER ASPECT*3

Select the aspect ratio of the area marker.

4:3, 14:9, 13:9, 2.35:1, 1.85:1,

 

 

1.66:1

SAFETY MARKER

Activate/deactivate the safety marker and select

☞ “NOTE”

 

the style of it.

 

SAFETY AREA

Adjust the area of the safety marker.

80% – 100%

FRAME

Displays/hides the frame indicating the area of the

OFF, ON

 

specified aspect ratio.

 

CENTER MARKER

Displays/hides the marker indicating the center

OFF, ON

 

position of the picture.

 

LINE BRIGHTNESS

Adjust the brightness of the marker.

HIGH, LOW

2/2

 

 

Item

To do

Setting value

R-AREA MARKER*3

Activate/deactivate the area marker and select the

☞ “NOTE”

 

style of it.

 

R-MARKER ASPECT*3

Select the aspect ratio of the area marker.

4:3, 14:9, 13:9, 2.35:1, 1.85:1,

 

 

1.66:1

R-SAFETY MARKER

Activate/deactivate the safety marker and select

☞ “NOTE”

 

the style of it.

 

R-SAFETY AREA

Adjust the area of the safety marker.

80% – 100%

•The area marker or the safety marker is displayed by using AREA MARKER or SAFETY MARKER button, or external control.

•Select either non-“R-” items or “R-” items to activate by using external control (☞ “External Control” on page 20).

•When a picture is displayed in 4:3 aspect ratio, the safety marker for the 4:3 area is displayed.

•To display the safety marker for the area of a picture displayed in 16:9 aspect ratio, hide the area marker (☞ “NOTE”).

*1 Memorized for each input.

*2 Not displayed when picture is displayed in the 1:1 mode.

*3 Displayed only when picture is displayed in 16:9 aspect ratio.

ENGLISH13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DT-V20L3G Power Connection Safety PrecautionsHow to replace the fuse Information for Users on Disposal of Old Equipment Dear CustomerEMC Supplement FCC NoticeTo install the stand InstallationTo detach the stand To prevent an accidental fall To adjust the stand heightHigher position Lower position Fixing the monitorFront panel Daily Operations / ConnectionsDual Link SDI Press buttons to select an item, then press button Display the menuRear panel DVI-D Hdcp terminal Attaching the power cord holderENGLISH9 On the signal format Video signalsWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of 3G SDI signal information Status indication of Dual LINK/3G SDI signal informationStatus indication of Dual Link GNDPicture Function Menu Configuration-MAIN MenuMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings of E.AUDIO Group Example of the vector scope Scope SETTING*1Example of the wave form monitor Sync FunctionSettings of SD43 Large Settings of sub menu PosiFunction Setting Picture SUB ADJWhite Balance SET SIZE/POSI. ADJInformation Setting of Character SETENGLISH19 All resetExternal Control Using the MAKE/TRIGGER systemAbout the external control SDI Tally SELDVI COMP./RGBRXD Using the serial communicationTXD RTSFunctions Data Basic command listENGLISH23 Troubleshooting Self-check program MaintenanceGeneral SpecificationsLCD panel Input/output terminalsSide view Front viewENGLISH27 DT-V24G1/DT-V20L3G Multi Format LCD Monitor

DT-V20L3G, 0110SKH-MW-MT, DT-V24G1 specifications

The JVC DT-V24G1 is a versatile 24-inch broadcast monitor designed for high-end professional applications. This monitor stands out with its full HD resolution of 1920 x 1200 pixels, ensuring that content is displayed with exceptional clarity and detail. Its advanced 10-bit IPS panel provides wide viewing angles, allowing multiple viewers to see the same high-quality image without color distortion. The DT-V24G1 supports various input formats, including SDI, HDMI, and composite, making it compatible with a wide range of video sources.

Another significant feature is the integrated waveform and vectorscope, which assist in professional monitoring and ensure accurate color grading and signal integrity. The DT-V24G1 is also equipped with built-in audio level meters, providing straightforward audio monitoring during production processes. Its flexible mount options add to its utility, allowing for easy integration into any studio setup or mobile broadcast unit.

The JVC DT-V20L3G is another noteworthy model, offering a 20-inch LCD display that delivers stunning picture quality with a native resolution of 1920 x 1080 pixels. This model is particularly suited for applications where space is at a premium, without sacrificing performance. It includes advanced color management tools, which allow for precise control over color reproduction, making it ideal for critical color work in post-production environments.

The DT-V20L3G features multiple input options, including HDMI, SDI, and DisplayPort, ensuring versatility and flexibility across various media types. It also has a compact and lightweight design, facilitating ease of transport for location shoots and smaller studio setups. The monitor’s built-in calibration tools allow users to maintain accurate color settings, ensuring reliability in every viewing condition.

Together, these monitors represent JVC's commitment to providing high-performance, reliable solutions for broadcast professionals. With advanced features, robust technologies, and a focus on user-friendly design, the JVC DT-V24G1 and DT-V20L3G are perfect for those looking to elevate their production quality. Whether in a studio, on location, or during post-production, these monitors stand out as essential tools for any broadcasting setup.
Top Page Image Contents