JVC DT-V24G1, DT-V20L3G Attaching the power cord holder, DVI-D Hdcp terminal, ENGLISH9

Page 9

8AUDIO ASSIGN (MONITOR OUT) terminals (pin jack) Output terminals for the analog audio signal.

•The terminals output the audio signal through AUDIO ASSIGN (IN 1 or IN 2) terminals when you select the video input you have selected for “AUDIO1 ASSIGN.” or “AUDIO2 ASSIGN.” in “AUDIO SETTING” (☞ page 14).

•The signal is output from this terminal only when the monitor is on or in “P.SAVE” (power save) mode (☞ “NO SYNC ACTION” on page 15).

•The EMBEDDED AUDIO signal...

–is decoded into an analog signal, then emitted.

–is emitted only when “SDI 1” or “SDI 2” is selected, and when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI (IN 1 or IN 2) terminal.

–has priority over the audio signal input to AUDIO ASSIGN (IN 1 or IN 2) terminals when “SDI-1” or “SDI-2” is selected for “AUDIO1 ASSIGN.” or “AUDIO2 ASSIGN.” and the EMBEDDED AUDIO signal is input to E.AUDIO HD/SD SDI (IN 1 or IN 2) terminal.

9E. AUDIO HD/SD SDI (IN 1, IN 2) terminals (BNC) Input terminals for the HD/SD SDI signals.

•The terminals accept also EMBEDDED AUDIO signals including up to 12 audio channels with a sampling frequency of 48 kHz.

•Use both terminals when selecting DUAL LINK SDI for the input.

pE. AUDIO HD/SD SDI (SWITCHED OUT) terminal (BNC) Output terminal for the HD/SD SDI signals.

•The SDI signals of the current input (SDI 1 or SDI 2) are re-clocked, then emitted.

•When an input other than SDI 1 and SDI 2 is selected, the SDI signal of the input selected last time is emitted from this terminal.

•The signals are emitted from this terminal only when the monitor is on or in “P.SAVE” (power save) mode.

•No signals are emitted when DUAL LINK SDI is selected for the input.

qDVI-D (HDCP) terminal

Input terminal for the DVI-D signal compatible with HDCP.

• When the picture is not displayed correctly, change the setting of “DVI INPUT SEL.” (☞ page 19).

Note for connections

•Before making any connections, turn off all the equipment.

•Use a cord whose plugs correctly match the terminals on this monitor and the equipment.

•Plugs should be firmly inserted; poor connections could cause noise.

•When unplugging a cord, be sure to grasp its plug and pull it out.

•DO NOT connect the power cord until all connections are complete.

•Refer also to the user manual of each piece of equipment.

Attaching the power cord holder

The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN terminal.

• The power cord holder consists of two parts, a case and a cover.

1

2

3

To detach the cover

 

AC IN

Cover

 

Case

terminal

 

 

 

 

 

 

 

CAUTION

•Use only the provided screws.

•Make sure the plug will not be pulled out after the cover is attached to the case.

ENGLISH9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DT-V20L3G Safety Precautions Power ConnectionHow to replace the fuse Information for Users on Disposal of Old Equipment Dear CustomerEMC Supplement FCC NoticeInstallation To install the standTo detach the stand To prevent an accidental fall To adjust the stand heightHigher position Lower position Fixing the monitorDaily Operations / Connections Front panelDual Link SDI Press buttons to select an item, then press button Display the menuRear panel Attaching the power cord holder DVI-D Hdcp terminalENGLISH9 On the signal format Video signalsWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of 3G SDI signal information Status indication of Dual LINK/3G SDI signal informationStatus indication of Dual Link GNDPicture Function Menu Configuration-MAIN MenuMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings of E.AUDIO Group Example of the vector scope Scope SETTING*1Example of the wave form monitor Sync FunctionSettings of SD43 Large Settings of sub menu PosiFunction Setting Picture SUB ADJWhite Balance SET SIZE/POSI. ADJInformation Setting of Character SETENGLISH19 All resetUsing the MAKE/TRIGGER system External ControlAbout the external control SDI Tally SELDVI COMP./RGBRXD Using the serial communicationTXD RTSBasic command list Functions DataENGLISH23 Troubleshooting Self-check program MaintenanceGeneral SpecificationsLCD panel Input/output terminalsFront view Side viewENGLISH27 DT-V24G1/DT-V20L3G Multi Format LCD Monitor

DT-V20L3G, 0110SKH-MW-MT, DT-V24G1 specifications

The JVC DT-V24G1 is a versatile 24-inch broadcast monitor designed for high-end professional applications. This monitor stands out with its full HD resolution of 1920 x 1200 pixels, ensuring that content is displayed with exceptional clarity and detail. Its advanced 10-bit IPS panel provides wide viewing angles, allowing multiple viewers to see the same high-quality image without color distortion. The DT-V24G1 supports various input formats, including SDI, HDMI, and composite, making it compatible with a wide range of video sources.

Another significant feature is the integrated waveform and vectorscope, which assist in professional monitoring and ensure accurate color grading and signal integrity. The DT-V24G1 is also equipped with built-in audio level meters, providing straightforward audio monitoring during production processes. Its flexible mount options add to its utility, allowing for easy integration into any studio setup or mobile broadcast unit.

The JVC DT-V20L3G is another noteworthy model, offering a 20-inch LCD display that delivers stunning picture quality with a native resolution of 1920 x 1080 pixels. This model is particularly suited for applications where space is at a premium, without sacrificing performance. It includes advanced color management tools, which allow for precise control over color reproduction, making it ideal for critical color work in post-production environments.

The DT-V20L3G features multiple input options, including HDMI, SDI, and DisplayPort, ensuring versatility and flexibility across various media types. It also has a compact and lightweight design, facilitating ease of transport for location shoots and smaller studio setups. The monitor’s built-in calibration tools allow users to maintain accurate color settings, ensuring reliability in every viewing condition.

Together, these monitors represent JVC's commitment to providing high-performance, reliable solutions for broadcast professionals. With advanced features, robust technologies, and a focus on user-friendly design, the JVC DT-V24G1 and DT-V20L3G are perfect for those looking to elevate their production quality. Whether in a studio, on location, or during post-production, these monitors stand out as essential tools for any broadcasting setup.
Top Page Image Contents