JVC DT-V24G1, DT-V20L3G, 0110SKH-MW-MT specifications Setting of Character SET, Information

Page 18

Menu Configuration—SET-UP MENU (cont.)

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “CHARACTER SET.”

Assign a name for each video source.

1Change the input to one that you want to assign a video source name for.

2 Select “CHARACTER SET.”

3Press buttons to select the first character.

•Each time you press button, the character changes as follows. Press button to reverse the order.

Space

4Press button to move the arrow to the next space.

• The characters entered before moving the arrow are memorized.

5Repeat steps 3 and 4 (10 characters at maximum).

6Press MENU button to store the name.

18

REMOTE SETTING (☞ “External Control” on pages 20 to 23)

Settings for the external control

Item

To do

Setting value

SERIAL TYPE

Select the input terminal used for external control by

RS232C, RS485

 

serial communication.

 

PARALLEL TYPE

Select the external control method for the MAKE/

MAKE, TRIGGER, SET

 

TRIGGER terminal.

 

PIN1

Assign the control functions to the pins of the MAKE/

☞ “Functions controlled by the

PIN2

TRIGGER terminal.

MAKE/TRIGGER system” on

PIN3

• Assign a function to each pin terminal by selecting

page 21

PIN4

“SET” in “PARALLEL TYPE” mentioned above.

 

PIN5

(The functions are assigned for “PIN6” – “PIN8”

 

 

and you cannot change the assignment of these

 

 

functions.)

 

INFORMATION

Settings for the information display of the monitor

Item

To do

Setting value

POSITION

Select the position to show the information display (☞ “On the

UPPER, LOWER

 

Information Display” on page 7).

 

SOURCE ID

Select whether the name assigned in “CHARACTER SET.” is displayed

OFF, ON, AUTO

 

on the screen (☞ “On the Information Display” on page 7).

 

 

• When “AUTO” is selected, the display color synchronizes with the

 

 

color of the tally lamp while the tally lamp is lit.

 

CHARACTER

Assign a name to each video source as you like (10 characters at

☞ “NOTE”

SET.*1

maximum). You can also enter a name using the RS-232C system.

 

STATUS DISPLAY

Select whether the status of the current input and the setting of

AUTO, OFF, ON

 

MUTING are displayed on the screen (☞ “On the Status Display” on

 

 

page 7).

 

TIME CODE

Select the type of the TIME CODE display.

VITC*2, LTC*2,

 

 

D-VITC

CRC ERROR

Select whether the CRC error indication for the input HD SDI signal is

ON, OFF

 

displayed on the screen (☞ “On the Information Display” on page 7).

 

SUB HOUR METER

Display the hours of use (unit: hour). You can reset this item.

 

MODEL

Display the model name of the monitor.

 

VERSION

Display the version of the monitor.

 

HOUR METER

Display the total hours of use (unit: hour). This item is used for maintenance of the

 

monitor. You cannot reset this item.

 

*1 Memorized for each input. *2 Ancillary time code

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DT-V20L3G Safety Precautions Power ConnectionHow to replace the fuse EMC Supplement Dear CustomerInformation for Users on Disposal of Old Equipment FCC NoticeInstallation To install the standTo detach the stand Higher position Lower position To adjust the stand heightTo prevent an accidental fall Fixing the monitorDaily Operations / Connections Front panelDual Link SDI Display the menu Press buttons to select an item, then press buttonRear panel Attaching the power cord holder DVI-D Hdcp terminalENGLISH9 When a DVI-D signal protected with Hdcp is input Video signalsOn the signal format When no video signal comesStatus indication of Dual Link Status indication of Dual LINK/3G SDI signal informationStatus indication of 3G SDI signal information GNDMenu Configuration-MAIN Menu Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker MARKER*1*2Settings of E.AUDIO Group Example of the wave form monitor Scope SETTING*1Example of the vector scope Sync FunctionFunction Setting Settings of sub menu PosiSettings of SD43 Large Picture SUB ADJSIZE/POSI. ADJ White Balance SETSetting of Character SET InformationAll reset ENGLISH19Using the MAKE/TRIGGER system External ControlAbout the external control DVI Tally SELSDI COMP./RGBTXD Using the serial communicationRXD RTSBasic command list Functions DataENGLISH23 Troubleshooting Maintenance Self-check programLCD panel SpecificationsGeneral Input/output terminalsFront view Side viewENGLISH27 DT-V24G1/DT-V20L3G Multi Format LCD Monitor

DT-V20L3G, 0110SKH-MW-MT, DT-V24G1 specifications

The JVC DT-V24G1 is a versatile 24-inch broadcast monitor designed for high-end professional applications. This monitor stands out with its full HD resolution of 1920 x 1200 pixels, ensuring that content is displayed with exceptional clarity and detail. Its advanced 10-bit IPS panel provides wide viewing angles, allowing multiple viewers to see the same high-quality image without color distortion. The DT-V24G1 supports various input formats, including SDI, HDMI, and composite, making it compatible with a wide range of video sources.

Another significant feature is the integrated waveform and vectorscope, which assist in professional monitoring and ensure accurate color grading and signal integrity. The DT-V24G1 is also equipped with built-in audio level meters, providing straightforward audio monitoring during production processes. Its flexible mount options add to its utility, allowing for easy integration into any studio setup or mobile broadcast unit.

The JVC DT-V20L3G is another noteworthy model, offering a 20-inch LCD display that delivers stunning picture quality with a native resolution of 1920 x 1080 pixels. This model is particularly suited for applications where space is at a premium, without sacrificing performance. It includes advanced color management tools, which allow for precise control over color reproduction, making it ideal for critical color work in post-production environments.

The DT-V20L3G features multiple input options, including HDMI, SDI, and DisplayPort, ensuring versatility and flexibility across various media types. It also has a compact and lightweight design, facilitating ease of transport for location shoots and smaller studio setups. The monitor’s built-in calibration tools allow users to maintain accurate color settings, ensuring reliability in every viewing condition.

Together, these monitors represent JVC's commitment to providing high-performance, reliable solutions for broadcast professionals. With advanced features, robust technologies, and a focus on user-friendly design, the JVC DT-V24G1 and DT-V20L3G are perfect for those looking to elevate their production quality. Whether in a studio, on location, or during post-production, these monitors stand out as essential tools for any broadcasting setup.
Top Page Image Contents