JVC 0110SKH-MW-MT, DT-V24G1, DT-V20L3G specifications Rear panel

Page 8

Daily Operations / Connections (cont.)

8

7Rear panel

1 2

Security slot

Attach a security wire to this slot.

The illustration of the monitor is of DT-V24G1.

1POWER switch

Turns AC power on or off.

• You need to press button (☞ u on page 6) to use the monitor after turning on the POWER switch.

2AC IN terminal

AC power input connector.

Connect the provided AC power cord to an AC outlet.

•Attach the provided power cord holder to prevent accidental disconnection of the AC power cord (☞ “Attaching the power cord holder” on page 9).

CAUTION

Do not connect the power cord until all other connections are completed.

3REMOTE terminal

Terminal for controlling the monitor by an external control (☞ “External Control” on page 20).

4VIDEO (INPUT 1/INPUT 2) terminals (BNC)

Input (IN) and output (OUT) terminals for the composite signals.

5COMPO./RGB (G/Y, B/PB/B-Y, R/PR/R-Y) terminals (BNC)

Input (IN) and output (OUT) terminals for the analog component (color difference) or analog RGB signals.

• Select the signal type in “COMPO./RGB SEL.” corresponding to the type of the input signal (☞ page 12).

6EXT.SYNC (CS) terminals (BNC)

Input (IN) and output (OUT) terminals for the external composite sync (Cs) signals.

•To use these terminals, set “SYNC INPUT SEL.” to “EXT.” (☞ “SYNC FUNCTION” on page 15).

•The terminals are for all VIDEO (INPUT 1, INPUT 2) and COMPO./RGB.

•When an external sync signal is input, external synchronization has priority over all VIDEO 1, VIDEO 2 and COMPO./RGB input.

7AUDIO ASSIGN (IN 1/IN 2) terminals (pin jack) Input terminals for the analog audio signals.

•Use this terminal for the analog audio connection of the SDI. When a superimposed signal (EMBEDDED AUDIO signal on an SDI signal) is input, analog audio signals cannot be input.

•Select the video input to assign the audio signal in “AUDIO1 ASSIGN.” or “AUDIO2 ASSIGN.” (☞ “AUDIO SETTING” on page 14).

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DT-V20L3G How to replace the fuse Safety PrecautionsPower Connection Dear Customer Information for Users on Disposal of Old EquipmentEMC Supplement FCC NoticeTo detach the stand InstallationTo install the stand To adjust the stand height To prevent an accidental fallHigher position Lower position Fixing the monitorDual Link SDI Daily Operations / ConnectionsFront panel Display the menu Press buttons to select an item, then press buttonRear panel ENGLISH9 Attaching the power cord holderDVI-D Hdcp terminal Video signals On the signal formatWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of Dual LINK/3G SDI signal information Status indication of 3G SDI signal informationStatus indication of Dual Link GNDMenu Configuration-MAIN Menu Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker MARKER*1*2Settings of E.AUDIO Group Scope SETTING*1 Example of the vector scopeExample of the wave form monitor Sync FunctionSettings of sub menu Posi Settings of SD43 LargeFunction Setting Picture SUB ADJSIZE/POSI. ADJ White Balance SETSetting of Character SET InformationAll reset ENGLISH19About the external control Using the MAKE/TRIGGER systemExternal Control Tally SEL SDIDVI COMP./RGBUsing the serial communication RXDTXD RTSENGLISH23 Basic command listFunctions Data Troubleshooting Maintenance Self-check programSpecifications GeneralLCD panel Input/output terminalsENGLISH27 Front viewSide view DT-V24G1/DT-V20L3G Multi Format LCD Monitor

DT-V20L3G, 0110SKH-MW-MT, DT-V24G1 specifications

The JVC DT-V24G1 is a versatile 24-inch broadcast monitor designed for high-end professional applications. This monitor stands out with its full HD resolution of 1920 x 1200 pixels, ensuring that content is displayed with exceptional clarity and detail. Its advanced 10-bit IPS panel provides wide viewing angles, allowing multiple viewers to see the same high-quality image without color distortion. The DT-V24G1 supports various input formats, including SDI, HDMI, and composite, making it compatible with a wide range of video sources.

Another significant feature is the integrated waveform and vectorscope, which assist in professional monitoring and ensure accurate color grading and signal integrity. The DT-V24G1 is also equipped with built-in audio level meters, providing straightforward audio monitoring during production processes. Its flexible mount options add to its utility, allowing for easy integration into any studio setup or mobile broadcast unit.

The JVC DT-V20L3G is another noteworthy model, offering a 20-inch LCD display that delivers stunning picture quality with a native resolution of 1920 x 1080 pixels. This model is particularly suited for applications where space is at a premium, without sacrificing performance. It includes advanced color management tools, which allow for precise control over color reproduction, making it ideal for critical color work in post-production environments.

The DT-V20L3G features multiple input options, including HDMI, SDI, and DisplayPort, ensuring versatility and flexibility across various media types. It also has a compact and lightweight design, facilitating ease of transport for location shoots and smaller studio setups. The monitor’s built-in calibration tools allow users to maintain accurate color settings, ensuring reliability in every viewing condition.

Together, these monitors represent JVC's commitment to providing high-performance, reliable solutions for broadcast professionals. With advanced features, robust technologies, and a focus on user-friendly design, the JVC DT-V24G1 and DT-V20L3G are perfect for those looking to elevate their production quality. Whether in a studio, on location, or during post-production, these monitors stand out as essential tools for any broadcasting setup.
Top Page Image Contents