JVC DT-V20L3G, DT-V24G1 Settings of sub menu Posi, Settings of SD43 Large, Function Setting

Page 16

Menu Configuration—SET-UP MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “sub menu POSI.”

The setting values and features are as follows.

LOWER1: Displays the current setting and adjustment bar at the lower part of the screen.

UPPER1: Displays the current setting and adjustment bar at the upper part of the screen.

LOWER2: Displays the current setting at the lower part of the screen.

UPPER2: Displays the current setting at the upper part of the screen.

• The adjustment bar is not displayed for some items.

Settings of “SD4:3 LARGE”

The setting values and features are as follows.

OFF: Fit the vertical picture size into the pixel numbers of the monitor display.

ON: Fit the vertical picture size into that of the monitor display.

16

FUNCTION SETTING

Settings for the sub menu display, color system, color of the tally lamp, picture size, intensity of the button lamps and the PHASE adjustment.

Item

To do

Setting value

sub menu

Select the contents and displaying position of “sub menu.”

☞ “NOTE”

POSI.

 

 

COLOR

Select the color system.

AUTO, NTSC, PAL

SYSTEM

• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”

 

TALLY SELECT

Select the color of the tally lamp.

GREEN, RED

SD4:3 LARGE

Change the picture size of 4:3 format signal.

☞ “NOTE”

DIMMER

Select the intensity of the button lamps.

NORMAL, DARK

COMPONENT

Deactivates the function of PHASE adjustment (Picture adjustment

ENABLE, DISABLE

PHASE

knob and “PICTURE SUB ADJ.” in SET-UP MENU) except when an

 

 

NTSC signal comes in (☞ 3 on page 6).

 

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment and selects the set-up level for the input video signal.

Item

To do

Setting value

CONTRAST*1

Adjust the standard level for the contrast adjusted with the

–20 – +20

 

CONTRAST knob on the front panel.

 

BRIGHT*1

Adjust the standard level for the brightness adjusted with the

–20 – +20

 

BRIGHT knob on the front panel.

 

CHROMA*1

Adjust the standard level for the chroma adjusted with the CHROMA

–20 – +20

 

knob on the front panel.

 

PHASE*1, *2

Adjust the standard level for the phase adjusted with the PHASE

–20 – +20

 

knob on the front panel.

 

NTSC SETUP

Select the set-up level of the input NTSC signal.

00 (compliant with

 

 

0% set-up signal),

 

 

7.5 (compliant with

 

 

7.5% set-up signal)

COMPO. LEVEL

Select the level of the analog component signal (480i and 576i only).

B75 (compliant

 

 

with BetacamVTR

 

 

7.5% set-up signal),

 

 

B00 (compliant

 

 

with BetacamVTR

 

 

0% set-up signal),

 

 

SMPTE (compliant

 

 

with M2VTR signals)

sub menu

Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while

 

viewing the actual picture.

 

reset

Restore the default settings for all the items in “PICTURE SUB ADJ.”

 

*1 Memorized for each input.

*2 When “COMPONENT PHASE” is set to “DISABLE” and an NTSC signal is input, PHASE can be adjusted.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DT-V20L3G Power Connection Safety PrecautionsHow to replace the fuse Dear Customer Information for Users on Disposal of Old EquipmentEMC Supplement FCC NoticeTo install the stand InstallationTo detach the stand To adjust the stand height To prevent an accidental fallHigher position Lower position Fixing the monitorFront panel Daily Operations / ConnectionsDual Link SDI Display the menu Press buttons to select an item, then press buttonRear panel DVI-D Hdcp terminal Attaching the power cord holderENGLISH9 Video signals On the signal formatWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of Dual LINK/3G SDI signal information Status indication of 3G SDI signal informationStatus indication of Dual Link GNDMenu Configuration-MAIN Menu Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker MARKER*1*2Settings of E.AUDIO Group Scope SETTING*1 Example of the vector scopeExample of the wave form monitor Sync FunctionSettings of sub menu Posi Settings of SD43 LargeFunction Setting Picture SUB ADJSIZE/POSI. ADJ White Balance SETSetting of Character SET InformationAll reset ENGLISH19External Control Using the MAKE/TRIGGER systemAbout the external control Tally SEL SDIDVI COMP./RGBUsing the serial communication RXDTXD RTSFunctions Data Basic command listENGLISH23 Troubleshooting Maintenance Self-check programSpecifications GeneralLCD panel Input/output terminalsSide view Front viewENGLISH27 DT-V24G1/DT-V20L3G Multi Format LCD Monitor

DT-V20L3G, 0110SKH-MW-MT, DT-V24G1 specifications

The JVC DT-V24G1 is a versatile 24-inch broadcast monitor designed for high-end professional applications. This monitor stands out with its full HD resolution of 1920 x 1200 pixels, ensuring that content is displayed with exceptional clarity and detail. Its advanced 10-bit IPS panel provides wide viewing angles, allowing multiple viewers to see the same high-quality image without color distortion. The DT-V24G1 supports various input formats, including SDI, HDMI, and composite, making it compatible with a wide range of video sources.

Another significant feature is the integrated waveform and vectorscope, which assist in professional monitoring and ensure accurate color grading and signal integrity. The DT-V24G1 is also equipped with built-in audio level meters, providing straightforward audio monitoring during production processes. Its flexible mount options add to its utility, allowing for easy integration into any studio setup or mobile broadcast unit.

The JVC DT-V20L3G is another noteworthy model, offering a 20-inch LCD display that delivers stunning picture quality with a native resolution of 1920 x 1080 pixels. This model is particularly suited for applications where space is at a premium, without sacrificing performance. It includes advanced color management tools, which allow for precise control over color reproduction, making it ideal for critical color work in post-production environments.

The DT-V20L3G features multiple input options, including HDMI, SDI, and DisplayPort, ensuring versatility and flexibility across various media types. It also has a compact and lightweight design, facilitating ease of transport for location shoots and smaller studio setups. The monitor’s built-in calibration tools allow users to maintain accurate color settings, ensuring reliability in every viewing condition.

Together, these monitors represent JVC's commitment to providing high-performance, reliable solutions for broadcast professionals. With advanced features, robust technologies, and a focus on user-friendly design, the JVC DT-V24G1 and DT-V20L3G are perfect for those looking to elevate their production quality. Whether in a studio, on location, or during post-production, these monitors stand out as essential tools for any broadcasting setup.
Top Page Image Contents