JVC Tally SEL, Sdi, Dvi, DT-R24L4D Video, DT-R17L4D Video, Marker, Frame, Mark.Sel, Aspect

<Functions controlled by the MAKE/TRIGGER system>

Display		Functions to be controlled	Opening		Short-circuiting
TALLY SEL		Selects the color of the tally lamp.	Green		Red
SDI 1		Changes the input to “SDI 1.”	Invalid		Valid
SDI 2		Changes the input to “SDI 2.”	Invalid		Valid
DVI		Changes the input to “DVI.”	Invalid		Valid
DT-R24L4D	VIDEO 1	Changes the input to “VIDEO 1.”	Invalid		Valid
	VIDEO 2	Changes the input to “VIDEO 2.”	Invalid		Valid
DT-R17L4D	VIDEO	Changes the input to “VIDEO.”	Invalid		Valid
A.MARKER		The area marker indication	Off		On
S.MARKER		The safety marker indication	Off		On
FRAME		Indication of the area of the specified aspect ratio	Off		On
C.MARKER		The center marker indication	Off		On
MARK.SEL		Selects the items of “MARKER”*3	Non-“R-” items		“R-” items
M.ASPECT		Changes the aspect ratio.	4:3		16:9
1:1		Displays in 1:1 mode.	Off		On
STATUS		Status display*4	☞ “On the Status Display” on page 11
L.METER		Audio level meter display		*5
TIME CODE		Time code display	Off		On
SOURCE ID		☞ “SOURCE ID” in “INFORMATION” on page 17		*6
COLOR OFF		Color off	Color		Monochrome
SCR CHECK		Screens check		*7
I/P MODE		Change a mode according to a input picture.		*8
MUTING		Muting on/off	Off		On
DIMMER		Change the intensity of the button lamps.	NORMAL		DARK
– – –		No function	—		—

*3 Selects which functions in “MARKER” are activated, non-“R-” items or “R-” items (☞ “MARKER” on page 13 to 14).

*4 Displays the information shown when INPUT SELECT button of the current input is pressed (☞ “On the Status Display” on page 11). While controlling with the MAKE system, the information is displayed only at the moment of short-circuiting.

*5 While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When “LEVEL METER ch” is set to “OFF,” the level meter is not displayed (“NO EFFECT” appears).

While controlling with the TRIGGER system, the pattern of the audio channel display is switched.

*6 While controlling with the MAKE system, the available set-up options will be the setting value currently selected in “SOURCE ID” (“ON” or “AUTO” [short-circuiting]) and “OFF” (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SET-UP MENU (☞ “SOURCE ID” in “INFORMATION” on page 17).

*7 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (☞ q on page 10).

*8 Must be controlled with the TRIGGER system. The mode changes in the order of “NORMAL” ¨ “CINEMA” ¨ “FIELD.” (This function cannot be controlled with the MAKE system.)

•You cannot assign the same function to different pin terminals.

•The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.

EN

19