JVC DT-R17L4D, DT-R24L4D Specifications, „ General, „ LCD panel, „ Input/output terminals

Specifications

„ General

Model name	DT-R24L4D		DT-R17L4D
Type	Multi format LCD monitor
Screen size	Type 24 wide format		Type 17 wide format
Aspect ratio	16:10		16:9
Horizontal/vertical frequency	H: 31.469 kHz – 75.000 kHz
(computer signal)	V: 48 Hz – 65 Hz
	* Some signals within this frequency range may not be displayed (“Out of range” is displayed).
Compliant video signal format	☞ “Available signals” on page 26
Format	HD SDI: BTA S-004C, SMPTE292M
	SD SDI: ITU-R BT.656: 525/625
	SMPTE259M: 525
	EMBEDDED AUDIO:
	SMPTE299M, SMPTE272M
Audio output	Internal speaker: 1.0 W + 1.0 W
Operating conditions	Operating temperature: 5°C – 35°C (41°F – 95°F)
	Operating humidity: 20% – 80% (non-condensing)
	(Slightly variable depending on ambient conditions for installation.)
Power requirements	AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated current	1.15 A (AC 120 V)		1.2 A (AC 120 V)
	0.67 A (AC 220 – 240 V)		0.8 A (AC 220 – 240 V)
External dimensions	Width:		Width:
(excluding protruding parts)	564 mm (22 1/4˝)	564 mm (22 1/4˝)	430 mm (17˝)	430 mm (17˝)
	Height:		Height:
	413.1 mm (16 3/8˝)	408 mm (16 1/8˝)	314.1 mm (12 3/8˝)	309 mm (12 1/4˝)
	Depth:		Depth:
	181 mm (7 1/4˝)	99 mm (4˝)	181 mm (7 1/4˝)	102 mm (4 1/8˝)
	(with the stand)	(without the stand)	(with the stand)	(without the stand)
Weight	10.1 kg (22.2 lbs) (with the stand)		8.0 kg (17.6 lbs) (with the stand)
	8.6 kg (18.9 lbs) (without the stand)		6.5 kg (14.3 lbs) (without the stand)
Accessories	AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder)

„ LCD panel

Model name		DT-R24L4D		DT-R17L4D
Type	24˝ wide, active matrix TFT		17˝ wide, active matrix TFT
Effective screen size	Width:	518.4 mm (20 1/2˝)	Width:	372.9 mm (14 3/4˝)
	Height:	324 mm (12 7/8˝)	Height:	209.7 mm (8 3/8˝)
Number of pixels displayed	1 920 x 1 200		1 366 x 768
Number of colors displayed	16.77 million
Viewing angle (TYP.)	178° (Horizontally), 178° (Vertically)		178° (Horizontally), 178° (Vertically)
Brightness (TYP.)	400 cd/m2		350 cd/m2
Contrast ratio (TYP.)	1000:1		900:1

„ Input/output terminals

	Model name	DT-R24L4D		DT-R17L4D
		Input/output of composite signal:		Input/output of composite signal:
	VIDEO (INPUT 1)	2 line, BNC connector x 4,		1 line, BNC connector x 2,
		1 V(p-p), 75 Ω	VIDEO	1 V(p-p), 75 Ω
		* The input (IN) and output (OUT)		* The input (IN) and output (OUT)
Video	VIDEO (INPUT 2)	terminals are bridge-connected (auto		terminals are bridge-connected (auto
		termination).		termination).
	DVI-D (HDCP)	DVI-D signal input (compatible with HDCP):
		DVI-D connector x 1 (compatible with DDC2B)
	E. AUDIO HD/SD SDI (IN 1)	Digital signal input (compatible with EMBEDDED AUDIO signals):
	E. AUDIO HD/SD SDI (IN 2)	auto detection, 2 line, BNC connector x 2
	E. AUDIO HD/SD SDI	Digital signal output (compatible with EMBEDDED AUDIO signals):
	(SWITCHED OUT)	1 line switched out, BNC connector x 1
	AUDIO ASSIGN (IN 1)	Analog audio signal input:		Analog audio signal input:
Audio		2 line, RCA connector x 4,	AUDIO (IN)	1 line, RCA connector x 2,
	AUDIO ASSIGN (IN 2)
		500 mV (rms), high impedance		500 mV (rms), high impedance
	AUDIO ASSIGN	Analog audio signal output:	AUDIO	Analog audio signal output:
		1 line, RCA connector x 2,		1 line, RCA connector x 2,
	(MONITOR OUT)		(MONITOR OUT)
		500 mV (rms)		500 mV (rms)
External control	REMOTE (MAKE/TRIGGER)	☞ “Using the MAKE/TRIGGER system” on page 18
	REMOTE (RS-485)	☞ “Using the serial communication” on page 20
	REMOTE (RS-232C)

24