<Basic command list>
No. |
|
|
|
| Commands |
|
|
|
| Functions | Data | |||
1 | ! | *1 | B | C | N | 1 | Cr |
|
|
|
| Starts communication (connection) | No data | |
2 | ! | *1 | B | C | N | 0 | Cr |
|
|
|
| Terminates communication (termination) | No data | |
3 | ! | *1 | B | I | D | S | E | T | x | x*2 | Cr | Assigns the control ID |
| 01 – 99 |
4 | ! | *1 | B | I | D | R | E | T | Cr |
|
| Initializes the control ID |
| No data |
5 | ! | *1 | B | I | D | D | S | P | x | x*2 | Cr | Displays/hides the ID |
| 00: Hide, 01: Display |
6 | ! | *1 | B | I | D | C | H | K | x | x*2 | Cr | Flashes/hides the selected ID No. of the monitor | 00: Hide, 01: Display | |
7 | ! | *1 | B | M | E | N | U | Cr |
|
|
| Displays the MAIN MENU/Quits the menu operation | No data | |
8 | ! | *1 | B | U | P | Cr |
|
|
|
|
| Moves the cursor upward ( | ) | No data |
9 | ! | *1 | B | D | O | W | N | Cr |
|
|
| Moves the cursor downward ( ) | No data | |
10 | ! | *1 | B | A | D | J | R | Cr |
|
|
| Makes setting/adjustment ( | ) | No data |
11 | ! | *1 | B | A | D | J | L | Cr |
|
|
| Makes setting/adjustment ( | ) | No data |
12 | ! | *1 | B | S | E | T | U | P | Cr |
|
| Displays the | No data | |
13 | ! | *1 | B | P | W | 1 | Cr |
|
|
|
| Turns on the monitor |
| No data |
14 | ! | *1 | B | P | W | 0 | Cr |
|
|
|
| Turns off the monitor (on standby) | No data | |
15 | ! | *1 | B | I | N | A | Cr |
|
|
|
| Selects “SDI 1” input |
| No data |
16 | ! | *1 | B | I | N | B | Cr |
|
|
|
| Selects “SDI 2” input |
| No data |
17 | ! | *1 | B | I | N | C | Cr |
|
|
|
| Selects “DVI” input |
| No data |
18 | ! | *1 | B | I | N | E | Cr |
|
|
|
| Selects “VIDEO | No data | |
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
19 | ! | *1 | B | I | N | F | Cr |
|
|
|
| Selects “VIDEO 2” input*3 |
| No data |
20 | ! | *1 | B | D | I | S | P | Cr |
|
|
| Displays the status*4 |
| No data |
21 | ! | *1 | B | A | M | U | T | E | x | x*2 | Cr | Turns muting on/off |
| 00: Off, 01: On |
22 | ! | *1 | B | A | S | P | x | x*2 | Cr |
|
| Changes the aspect ratio |
| 00: 4:3, 01: 16:9 |
•“Cr” is 0Dh.
•The commands for starting communication (connection) (No. 1), terminating communication (termination) (No. 2), and turning on the monitor (No. 13) can be used while the monitor is off (on standby).
*1 Enter the monitor’s ID for “ **.” The initial setting of the monitor’s ID is “00.” When connecting several monitors, “00” is a command for controlling all monitors at once.
*2 Enter the appropriate data to “xx.”
*3 DT-R24L4D only
*4 Displays the information shown when the INPUT SELECT button currently lit is pressed (☞ “On the Status Display” on page 11).
EN
21