JVC DT-R17L4D user service Connections, „ Rear panel, DT-R24L4D

Page 8

Connections

„Rear panel

DT-R24L4D

DT-R24L4D

The illustration of the monitor is of DT-R24L4D.

DT-R17L4D

DT-R17L4D

Security slot Attach a security wire to this slot.

1POWER switch

Turns AC power on or off.

 

• You need to press

button (☞ t on page 10) to use the monitor after turning on the POWER switch.

2AC IN terminal

AC power input connector.

Connect the provided AC power cord to an AC outlet.

•Attach the provided power cord holder to prevent accidental disconnection of the AC power cord (☞ “Attaching the power cord holder” on page 9).

CAUTION

Do not connect the power cord until all other connections are completed.

3REMOTE terminal

Terminal for controlling the monitor by an external control (☞ “External Control” on page 18).

4For DT-R24L4D: VIDEO (INPUT 1/INPUT 2) terminals (BNC) / For DT-R17L4D: VIDEO terminals (BNC) Input (IN) and output (OUT) terminals for the composite signals.

5For DT-R24L4D: AUDIO ASSIGN (IN 1/IN 2) terminals (pin jack) / For DT-R17L4D: AUDIO (IN) terminals (pin jack) Input terminals for the analog audio signals.

•Use this terminal for the analog audio connection of the SDI. When a superimposed signal (EMBEDDED AUDIO signal on an SDI signal) is input, analog audio signals cannot be input.

•For DT-R24L4D: Select the video input to assign the audio signal in “AUDIO1 ASSIGN.” or “AUDIO2 ASSIGN.” (☞ “AUDIO SETTING” on page 14).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DT-R24L4D DT-R17L4D Table of Contents How to replace the fuse Safety PrecautionsPower Connection To prevent an accidental fall Important Recycling InformationFixing the monitor A. only„ Caution for use of the product for many hours „ Caution for use of the product in the high temperature„ Maintenance To detach the stand InstallationTo install the stand To install the monitor on a wall Connections „ Rear panelDT-R24L4D DT-R17L4DAttaching the power cord holder DVI-D Hdcp terminalDT-R17L4D DT-R24L4D Daily Operations„ Front panel Press or button when a menu is not displayed Press Menu button„ The operation procedure „ Menu Transition DiagramMenu Configuration Display the menuPicture Function Back LightAuto Aspect MARKER*1*2Audio Setting Picture SUB ADJ Function SettingSync Function White Balance SET Remote SettingSIZE/POSI. ADJ Setting of Character SET All resetInformation Control Lock„ About the external control „ Using the MAKE/TRIGGER systemExternal Control Tally SEL SDIDVI DT-R24L4D Video„ Using the serial communication Basic command list Commands Functions Data Troubleshooting „ Self-check program Check which lamps are flashingSpecifications „ General„ LCD panel „ Input/output terminalsDT-R24L4D DT-R17L4D„ Available signals Video signalsVideo Audio HD/SD SDI INPUT1, INPUT2Computer signals preset DVI-D Hdcp terminals Specification of the DVI-D Hdcp terminalGND D.S Clock+
Top Page Image Contents