JVC DT-V17L3DY Setting of Character SET, Information, Control Lock Setting value OFF, on

Page 15

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “CHARACTER SET.”

Assign a name for each video source.

1Change the input to one that you want to assign a video source name for.

2 Select “CHARACTER SET.”

3Press buttons to select the first character.

•Each time you press button, the character changes as follows. Press button to reverse the order.

Space

4Press button to move the arrow to the next space.

• The characters entered before moving the arrow are memorized.

5Repeat steps 3 and 4 (10 characters at maximum).

6Press MENU button to store the name.

REMOTE SETTING (☞ “External Control” on pages 16 to 18)

Settings for the external control

Item

To do

Setting value

SERIAL TYPE

Select the input terminal used for external control by

RS232C, RS485

 

serial communication.

 

PARALLEL TYPE

Select the external control method for the MAKE/

MAKE, TRIGGER, SET

 

TRIGGER terminal.

 

PIN1, PIN2, PIN3,

Assign the control functions to the pins of the MAKE/

☞ “Functions controlled by the MAKE/

PIN4, PIN5

TRIGGER terminal.

TRIGGER system” on page 17

 

• Assign a function to each pin terminal by selecting

 

 

“SET” in “PARALLEL TYPE” mentioned above. (The

 

 

functions are assigned for “PIN6” – “PIN8” and you

 

 

cannot change the assignment of these functions.)

 

INFORMATION

Settings for the information display of the monitor

Item

To do

Setting value

POSITION

Select the position to show the information display (☞ “On the

UPPER, LOWER

 

Information Display” on page 7).

 

SOURCE ID

Select if the name assigned in “CHARACTER SET.” is displayed on

OFF, ON

 

the screen (☞ “On the Information Display” on page 7).

 

CHARACTER SET.*1

Assign a name to each video source as you like (10 characters at

☞ “NOTE”

 

maximum). You can also enter a name using the RS-232C system.

 

STATUS DISPLAY

Select if the status of the current input and the setting of muting are

AUTO, OFF, ON

 

displayed on the screen (☞ “On the Status Display” on page 7).

 

CRC ERROR

Select if the CRC error indication for the input HD SDI signal is displayed

ON, OFF

 

on the screen (☞ “On the Information Display” on page 7).

 

SUB HOUR METER

Display the hours of use (unit: hour). You can reset this item.

 

MODEL

Display the model name of the monitor.

 

VERSION

Display the version of the monitor.

 

HOUR METER

Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You

 

cannot reset this item.

 

*1 Memorized for each input.

CONTROL LOCK Setting value: OFF, ON

Turns on (or off) the control lock function to disable the buttons on the front panel.

•The following operations are available even when this function is activated.

–Turning on/off (on standby) the monitor

–Displaying the SET-UP MENU (by pressing button while holding button) and turning “CONTROL LOCK” to “OFF”

–Operating the monitor by an external control

If you try other operations, “ Control lock on!” appears on the screen.

all reset

Restores all the settings and adjustments of the monitor to the default.

•“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.

•When you operate the monitor with the AC power supply, the monitor is turned off (on standby) then turned on automatically. When you operate the monitor with the DC 12 V power supply, the monitor is turned off (on standby).

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DT-V17L3DY These openings must not be blocked or covered Safety PrecautionsImportant Safety Instructions You can tilt the monitor as follows InstallationTo install the stand To detach the standHigher position Lower position To adjust the stand heightFix the monitor to a wall by using strings To prevent an accidental fallFront panel Press Menu button Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Daily Operations / ConnectionsComputer signals preset DVI-D Hdcp terminals Available signalsAttaching the power cord holder Video signalsOperation guide Menu Configuration-MAIN MenuSetting value -20 +20 Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker Settings for marker functions 1/2MARKER*1*2 Settings of E.AUDIO Group Wave Form SETTING*1 Example of the wave form monitorSync Function Settings of SD43 Large Settings of sub menu PosiInformation Setting of Character SETSettings for the information display of the monitor Control Lock Setting value OFF, onMAKE/TRIGGER system External ControlAbout the external control Control priority is as followsFunctions controlled by the MAKE/TRIGGER system Using the MAKE/TRIGGER systemTo assign the functions to the pin terminals Operation of the external controlBasic command list Using the serial communicationCommunication specifications Command outlineTroubleshooting Cabinet Maintenance20Unplug this product from the wall outlet before cleaning ScreenVideo SpecificationsGeneral Input/output terminalsRear view Dimensions Unit mm inchFront view Side viewPage DT-V17L3DY Multi Format LCD Monitor

DT-V17L3DY specifications

The JVC DT-V17L3DY is a compact, high-performance 17-inch LCD monitor designed for professional video applications. Tailored for broadcast and production environments, it delivers exceptional image quality and a range of features suited for demanding tasks.

One of the standout characteristics of the DT-V17L3DY is its high-resolution display, featuring a native resolution of 1920 x 1080 pixels, which is capable of displaying Full HD content with impressive clarity. The monitor boasts a wide viewing angle, ensuring that images remain consistent and vibrant from various positions. This is particularly advantageous in multi-user environments, such as control rooms or collaborative studios, where several individuals may be viewing the screen simultaneously.

The DT-V17L3DY utilizes advanced color reproduction technologies, resulting in rich and accurate colors. With a high contrast ratio, it provides deep blacks and bright whites, enhancing the overall viewing experience. To further refine color accuracy, it supports a built-in color calibration feature, allowing users to adjust settings according to specific requirements or standards, making it an excellent choice for color-critical work such as film and video production.

In terms of connectivity, the monitor is equipped with a variety of input options, including HDMI, SDI, and analog connections. This versatility ensures compatibility with a wide range of video sources, accommodating different workflows and setups. Furthermore, the DT-V17L3DY supports both interlaced and progressive signal formats, making it adaptable to a broad spectrum of broadcasting standards.

The monitor's ergonomic design features a sturdy and lightweight chassis, making it suitable for both desktop and rack-mounted applications. Its flexible mounting options allow for easy integration into any setup, whether in a studio, on location, or within an OB van.

Additional features include embedded audio monitoring capabilities, allowing users to check audio levels directly from the monitor, and a set of user-friendly controls for adjusting settings quickly and intuitively. This combination of advanced technology, exceptional display quality, and practical usability makes the JVC DT-V17L3DY a reliable choice for professionals in the video production industry. Whether used for editing, monitoring, or playback, this monitor stands out as a valuable tool for achieving the highest standards in broadcast quality.
Top Page Image Contents