JVC DT-V17L3DY Installation, To detach the stand, You can tilt the monitor as follows

Page 4

Installation

CAUTION

•Do not rest your arm on the monitor or lean against the monitor.

•Do not touch the LCD panel when installing the monitor.

•Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.

4

To detach the stand

CAUTION

Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

You can place the monitor in the following two ways when using it on the supplied stand.

Attachment screws

You can tilt the monitor as follows.

Monitor

About 12°

0°

Stand

 

About 8°

•When the monitor is not tilted (0°), the guidelines align as illustrated below.

Guidelines

When the stand plate is attached to the higher position of the stand body (☞ “To adjust the stand height” on page 5), you can place the monitor as illustrated below.

1Remove the screws on the right side of the stand (see the illustration below), then lift the stand up by about 144°.

About 144°

Screw (silver)

2Attach the removed screws and place the monitor as illustrated below.

Screw holes for stand attachment

Monitor

Stand body

•You can select the stand height—higher position or lower position (☞ “To adjust the stand height” on page 5).

CAUTION

•Be careful not to pinch your fingers in the gap between the monitor and the stand.

•When the stand plate is attached to the lower position of the stand body, you cannot tilt the monitor downward.

•To place the monitor as illustrated on the left again, remove the screws on the right side of the stand, return the monitor angle to 0°, then reattach the removed screws.

CAUTION

•When lifting up the stand...

–lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

–be careful not to pinch your fingers in the moving parts.

•Make sure of lifting the stand up until it stops (about 144°); otherwise the monitor may fall over.

•Place the monitor on a mat to avoid scratching the table surface.

•Do not lift up the stand when the stand plate is attached to the lower position of the stand body.

•When the battery is attached, the stand may not be lifted up depending on the type of the battery.

To install the stand

When attaching the stand to the monitor, insert the guides of the stand into the guide holes on the monitor to place the stand in the correct position. Then fix the stand firmly with the attachment screws.

Guide holes

Guides

Screw holes for stand attachment

Monitor

Stand plate

Stand body

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DT-V17L3DY Safety Precautions These openings must not be blocked or coveredImportant Safety Instructions Installation To install the standTo detach the stand You can tilt the monitor as followsTo adjust the stand height Fix the monitor to a wall by using stringsTo prevent an accidental fall Higher position Lower positionFront panel Press or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press Menu buttonDaily Operations / Connections Rear panelAvailable signals Attaching the power cord holderVideo signals Computer signals preset DVI-D Hdcp terminalsMenu Configuration-MAIN Menu Setting value -20 +20Picture Function Operation guideSettings for marker functions 1/2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerMARKER*1*2 Settings of E.AUDIO Group Example of the wave form monitor Wave Form SETTING*1Sync Function Settings of sub menu Posi Settings of SD43 LargeSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on InformationExternal Control About the external controlControl priority is as follows MAKE/TRIGGER systemUsing the MAKE/TRIGGER system To assign the functions to the pin terminalsOperation of the external control Functions controlled by the MAKE/TRIGGER systemUsing the serial communication Communication specificationsCommand outline Basic command listTroubleshooting Maintenance20 Unplug this product from the wall outlet before cleaningScreen CabinetSpecifications GeneralInput/output terminals VideoDimensions Unit mm inch Front viewSide view Rear viewPage DT-V17L3DY Multi Format LCD Monitor

DT-V17L3DY specifications

The JVC DT-V17L3DY is a compact, high-performance 17-inch LCD monitor designed for professional video applications. Tailored for broadcast and production environments, it delivers exceptional image quality and a range of features suited for demanding tasks.

One of the standout characteristics of the DT-V17L3DY is its high-resolution display, featuring a native resolution of 1920 x 1080 pixels, which is capable of displaying Full HD content with impressive clarity. The monitor boasts a wide viewing angle, ensuring that images remain consistent and vibrant from various positions. This is particularly advantageous in multi-user environments, such as control rooms or collaborative studios, where several individuals may be viewing the screen simultaneously.

The DT-V17L3DY utilizes advanced color reproduction technologies, resulting in rich and accurate colors. With a high contrast ratio, it provides deep blacks and bright whites, enhancing the overall viewing experience. To further refine color accuracy, it supports a built-in color calibration feature, allowing users to adjust settings according to specific requirements or standards, making it an excellent choice for color-critical work such as film and video production.

In terms of connectivity, the monitor is equipped with a variety of input options, including HDMI, SDI, and analog connections. This versatility ensures compatibility with a wide range of video sources, accommodating different workflows and setups. Furthermore, the DT-V17L3DY supports both interlaced and progressive signal formats, making it adaptable to a broad spectrum of broadcasting standards.

The monitor's ergonomic design features a sturdy and lightweight chassis, making it suitable for both desktop and rack-mounted applications. Its flexible mounting options allow for easy integration into any setup, whether in a studio, on location, or within an OB van.

Additional features include embedded audio monitoring capabilities, allowing users to check audio levels directly from the monitor, and a set of user-friendly controls for adjusting settings quickly and intuitively. This combination of advanced technology, exceptional display quality, and practical usability makes the JVC DT-V17L3DY a reliable choice for professionals in the video production industry. Whether used for editing, monitoring, or playback, this monitor stands out as a valuable tool for achieving the highest standards in broadcast quality.
Top Page Image Contents