JVC DT-V17L3DY specifications Display the menu, Press buttons to select an item, then press button

Page 7

Menu Operations

1 Display the menu.

To display the MAIN MENU

\Press MENU button.

To display the SET-UP MENU

\Press button while holding button.

MAIN MENU

Selected item

Operation guide

SET-UP MENU

Selected item

Operation guide

2 Press buttons to select an item, then press button.

•For some items, adjustments will be made by

pressing .

Ex.: When “MARKER” in the MAIN

MENU is selected

3 Press buttons to select an item,

then press buttons to make adjustments.

4 Press MENU button to finish the menu operation.

•Pressing MENU button repeatedly deactivates the display of the menu.

Audio Channel Selection

Select audio channels emitted from the speakers (L/R) and the AUDIO (MONITOR OUT) (OUT1(L)/ OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI terminal (IN1 or IN2) and SDI input (1 or 2) is selected.

•You have to choose a group of selectable audio channels before the channel selection (☞ “E.AUDIO GROUP” in “AUDIO SETTING” on page 12).

•The setting is memorized for each input (SDI 1 and SDI 2).

1 Press or button when a menu is not displayed.

The screen for audio channel selection is displayed.

•The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation.

Audio channel selection screen

Selected item

2 Press buttons to select the left (L ch) or right (R ch).

3 Press buttons to select an audio channel.

•Each time you press the button, the audio channel changes according to the settings of “E.AUDIO GROUP” (☞ “NOTE” on page 12).

4 Press MENU button.

The screen for audio channel selection disappears.

Using the audio level meter

You can check the conditions of the current EMBEDDED AUDIO signals in the audio level meter. (☞ “On the Information Display” on the right, “LEVEL METER SETTING” in “AUDIO SETTING” on page 12).

On the Information Display

The monitor displays the information below.

•Make the setting to display/hide each information using the MENU with the exception of 5, controlled with T.C. button (☞ r on page 6).

•Select the position of the information display (☞ “POSITION” in “INFORMATION” on page 15).

1Audio level meter

•Not displayed when “LEVEL METER ch” is set to “OFF.” (☞ “AUDIO SETTING” on page 12)

2Signal format

•Displayed when “STATUS DISPLAY” is set to “ON.” (☞ “INFORMATION” on page 15)

•For the contents displayed, see “On the signal format” below and “Available signals” on page 9.

3Source name assigned in “CHARACTER SET.”

•Displayed when “SOURCE ID” is set to “ON.”

•Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO.”

☞“INFORMATION” on page 15

4 CRC error indication

• Displayed when “CRC ERROR” is set to “ON.” (☞ “INFORMATION” on page 15)

• A red square is displayed when an error occurs.

5 Time code

• When the input signal includes no time code, “TC – –:– –:– –:– –” is displayed.

☞“ r T.C. (time code) button/lamp” on page 6

•When any information of 1, 2, 3, or 4 above is displayed while signals come in from equipment other than a computer, the picture is displayed without overlapping the information display area.

However, the information display will overlap with the picture when...

–displaying the picture with higher resolution than the resolution of the panel in 1:1 mode.

–“SD4:3 LARGE” setting is “ON.”

(☞ “FUNCTION SETTING” on page 14).

On the Status Display

If you press the INPUT SELECT button (☞ t on page 6) currently lit, the status of the input signal and setting of muting are displayed for about 3 seconds.

•Make the setting to display/hide the status in “STATUS DISPLAY” of the “INFORMATION” (☞ page 15).

•When “STATUS DISPLAY” is set to “AUTO” or “ON,” the status below is also displayed in the following cases:

–When you change the input

–When the signal condition of the current input changes

–When you turn on the monitor

•When “STATUS DISPLAY” is set to “ON,” the signal format will remain displayed 3 seconds after the status is displayed.

1Signal format

•For the contents displayed, see “On the signal format” below and “Available signals” on page 9.

2Signal format of DVI input

☞“DVI INPUT SEL.” on page 10

3 Setting of “MUTING”

• Displayed only when muting is activated.

☞“ 4 MUTING button” on page 6

On the signal format

The following messages appear depending on the type of input signals and their conditions.

When a DVI-D signal protected with HDCP is input

\“*” (at the end of the indication)

When no video signal comes in

\“NO SYNC”

When a noncompliant video signal comes in

\“Out of range”

When “COLOR SYSTEM” (☞ “FUNCTION

SETTING” on page 14) is set to “AUTO” and the noncompliant composite video signals come in

\“OTHERS”

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DT-V17L3DY These openings must not be blocked or covered Safety PrecautionsImportant Safety Instructions You can tilt the monitor as follows InstallationTo install the stand To detach the standHigher position Lower position To adjust the stand heightFix the monitor to a wall by using strings To prevent an accidental fallFront panel Press Menu button Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Daily Operations / ConnectionsComputer signals preset DVI-D Hdcp terminals Available signalsAttaching the power cord holder Video signalsOperation guide Menu Configuration-MAIN MenuSetting value -20 +20 Picture FunctionSettings for marker functions 1/2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerMARKER*1*2 Settings of E.AUDIO Group Example of the wave form monitor Wave Form SETTING*1Sync Function Settings of SD43 Large Settings of sub menu PosiInformation Setting of Character SETSettings for the information display of the monitor Control Lock Setting value OFF, onMAKE/TRIGGER system External ControlAbout the external control Control priority is as followsFunctions controlled by the MAKE/TRIGGER system Using the MAKE/TRIGGER systemTo assign the functions to the pin terminals Operation of the external controlBasic command list Using the serial communicationCommunication specifications Command outlineTroubleshooting Cabinet Maintenance20Unplug this product from the wall outlet before cleaning ScreenVideo SpecificationsGeneral Input/output terminalsRear view Dimensions Unit mm inchFront view Side viewPage DT-V17L3DY Multi Format LCD Monitor

DT-V17L3DY specifications

The JVC DT-V17L3DY is a compact, high-performance 17-inch LCD monitor designed for professional video applications. Tailored for broadcast and production environments, it delivers exceptional image quality and a range of features suited for demanding tasks.

One of the standout characteristics of the DT-V17L3DY is its high-resolution display, featuring a native resolution of 1920 x 1080 pixels, which is capable of displaying Full HD content with impressive clarity. The monitor boasts a wide viewing angle, ensuring that images remain consistent and vibrant from various positions. This is particularly advantageous in multi-user environments, such as control rooms or collaborative studios, where several individuals may be viewing the screen simultaneously.

The DT-V17L3DY utilizes advanced color reproduction technologies, resulting in rich and accurate colors. With a high contrast ratio, it provides deep blacks and bright whites, enhancing the overall viewing experience. To further refine color accuracy, it supports a built-in color calibration feature, allowing users to adjust settings according to specific requirements or standards, making it an excellent choice for color-critical work such as film and video production.

In terms of connectivity, the monitor is equipped with a variety of input options, including HDMI, SDI, and analog connections. This versatility ensures compatibility with a wide range of video sources, accommodating different workflows and setups. Furthermore, the DT-V17L3DY supports both interlaced and progressive signal formats, making it adaptable to a broad spectrum of broadcasting standards.

The monitor's ergonomic design features a sturdy and lightweight chassis, making it suitable for both desktop and rack-mounted applications. Its flexible mounting options allow for easy integration into any setup, whether in a studio, on location, or within an OB van.

Additional features include embedded audio monitoring capabilities, allowing users to check audio levels directly from the monitor, and a set of user-friendly controls for adjusting settings quickly and intuitively. This combination of advanced technology, exceptional display quality, and practical usability makes the JVC DT-V17L3DY a reliable choice for professionals in the video production industry. Whether used for editing, monitoring, or playback, this monitor stands out as a valuable tool for achieving the highest standards in broadcast quality.
Top Page Image Contents