JVC DT-V17L3DY specifications Daily Operations / Connections, Rear panel

Page 8

Daily Operations / Connections (cont.)

8

7Rear panel

Carry handle

Use this handle when carrying the monitor.

CAUTION

Do not connect the power cord until all other connections are completed.

7E. AUDIO HD/SD SDI (SWITCHED OUT) terminal (BNC)

Output terminal for the HD/SD SDI signals.

•The SDI signals of the current input (SDI 1 or SDI 2) are re-clocked, then emitted.

•When an input other than SDI 1 and SDI 2 is selected, the SDI signal of the input selected last time is emitted from this terminal.

•The signals are emitted from this terminal only when the monitor is on or in “P.SAVE” (power save) mode.

8DVI-D (HDCP) terminal

Input terminal for the DVI-D signal compatible with HDCP.

•When the picture is not displayed correctly, change the setting of “DVI INPUT SEL.” (☞ page 10).

wPOWER switch

Turns AC power on or off.

•You need to press button (☞ u on page 6) to use the monitor after turning on the POWER switch.

eScrew holes for external battery attachment Attach external battery for DC 12 V power supply by using 2 screw holes. Choose the appropriate screw holes from 1, 2, 3 or 4, according to the type of external battery.

•Use the Anton Bauer Dionic 90 (mount: QR DXC- M3A) external battery.

CAUTION

•

Do not use the external battery for DC 24 V

 

power supply.

•

Use only the battery specified above. If a heavy

1 REMOTE terminal

Terminal for controlling the monitor by an external control. (☞ “External Control” on page 16)

 

 

2 VIDEO terminals (BNC)

e

r

Input (IN) and output (OUT) terminals for the

 

 

composite video signals.

 

 

3 COMPO. (Y, PB/B-Y, PR/R-Y) terminals (BNC)

 

 

Input (IN) and output (OUT) terminals for the analog

 

 

component video (color difference) signals.

 

 

4 AUDIO (IN) terminals (pin jack)

 

 

Input terminals for the analog audio signals.

 

 

•

Use this terminal for the analog audio connection

 

 

 

of the SDI.

 

 

5 AUDIO (MONITOR OUT) terminals (pin jack)

 

 

Output terminals for the analog audio signal.

 

 

•

The terminals emit the audio signals through

 

 

 

the AUDIO (IN) terminal or EMBEDDED AUDIO

 

 

 

signals through the E. AUDIO HD/SD SDI (IN 1 or

 

 

 

IN 2) input terminal.

 

 

•

The signal is output from this terminal only

 

 

 

when the monitor is on or in “P.SAVE” (power

 

 

 

save) mode. (☞ “NO SYNC ACTION” in “SYNC

 

 

 

FUNCTION” on page 13)

 

 

• The EMBEDDED AUDIO signal...

 

 

 

– is decoded into an analog signal, then emitted.

 

 

 

– is emitted only when “SDI 1” or “SDI 2” is

 

 

 

selected, and when EMBEDDED AUDIO

 

 

 

signals come in to the E. AUDIO HD/SD SDI

 

 

 

(IN 1 or IN 2) terminal.

 

 

6 E. AUDIO HD/SD SDI (IN 1, IN 2) terminals (BNC)

 

 

Input terminals for the HD/SD SDI signals.

 

 

• The terminals accept also EMBEDDED AUDIO

 

 

 

signals including up to 12 audio channels with a

 

 

 

sampling frequency of 48 kHz.

9DC IN 12V terminal

DC 12 V (maximum DC 17 V) power input connector.

When using DC 12 V power (maximum DC 17 V), check the DC IN 12V terminal pin signal, and use the correct polarity. If the polarity is reversed, this could cause a fire or personal injury.

•While using both the AC and DC 12 V power supply, AC power supply is preferentially used. If the AC power supply is cut off (for example, when turning off the POWER switch), the power supply automatically switches to the DC 12 V power supply.

pDC switch

Turns the DC 12 V power on or off.

•You need to press button (☞ u on page

6) on the front panel to turn on the monitor after turning on the DC switch.

•The monitor consumes the battery even while the monitor is on standby. To save battery life, turn off the DC switch.

qAC IN terminal

AC power input connector.

Connect the provided AC power cord to an AC outlet.

•Attach the provided power cord holder to prevent accidental disconnection of the AC power cord (☞ “Attaching the power cord holder” on page 9).

battery is used, it may fall off depending on the

way the monitor is used.

• When an external battery is attached, attach the

ferrite core (provided) to the power cord from the

mount as illustrated below.

Ex.: When the Anton Bauer mount (QR DXC-M3A) is used

Ferrite core

rSecurity slot

Attach a security wire to this slot.

Note for connections

•Before making any connections, turn off all the equipment.

•Use a cord whose plugs correctly match the terminals on this monitor and the equipment.

•Plugs should be firmly inserted; poor connections could cause noise.

•When unplugging a cord, be sure to grasp its plug and pull it out.

•DO NOT connect the power cord until all connections are complete.

•Refer also to the user manual of each piece of equipment.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DT-V17L3DY Safety Precautions These openings must not be blocked or coveredImportant Safety Instructions Installation To install the standTo detach the stand You can tilt the monitor as followsTo adjust the stand height Fix the monitor to a wall by using stringsTo prevent an accidental fall Higher position Lower positionFront panel Press or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press Menu buttonDaily Operations / Connections Rear panelAvailable signals Attaching the power cord holderVideo signals Computer signals preset DVI-D Hdcp terminalsMenu Configuration-MAIN Menu Setting value -20 +20Picture Function Operation guideMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 Settings of E.AUDIO Group Sync Function Wave Form SETTING*1Example of the wave form monitor Settings of sub menu Posi Settings of SD43 LargeSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on InformationExternal Control About the external controlControl priority is as follows MAKE/TRIGGER systemUsing the MAKE/TRIGGER system To assign the functions to the pin terminalsOperation of the external control Functions controlled by the MAKE/TRIGGER systemUsing the serial communication Communication specificationsCommand outline Basic command listTroubleshooting Maintenance20 Unplug this product from the wall outlet before cleaningScreen CabinetSpecifications GeneralInput/output terminals VideoDimensions Unit mm inch Front viewSide view Rear viewPage DT-V17L3DY Multi Format LCD Monitor

DT-V17L3DY specifications

The JVC DT-V17L3DY is a compact, high-performance 17-inch LCD monitor designed for professional video applications. Tailored for broadcast and production environments, it delivers exceptional image quality and a range of features suited for demanding tasks.

One of the standout characteristics of the DT-V17L3DY is its high-resolution display, featuring a native resolution of 1920 x 1080 pixels, which is capable of displaying Full HD content with impressive clarity. The monitor boasts a wide viewing angle, ensuring that images remain consistent and vibrant from various positions. This is particularly advantageous in multi-user environments, such as control rooms or collaborative studios, where several individuals may be viewing the screen simultaneously.

The DT-V17L3DY utilizes advanced color reproduction technologies, resulting in rich and accurate colors. With a high contrast ratio, it provides deep blacks and bright whites, enhancing the overall viewing experience. To further refine color accuracy, it supports a built-in color calibration feature, allowing users to adjust settings according to specific requirements or standards, making it an excellent choice for color-critical work such as film and video production.

In terms of connectivity, the monitor is equipped with a variety of input options, including HDMI, SDI, and analog connections. This versatility ensures compatibility with a wide range of video sources, accommodating different workflows and setups. Furthermore, the DT-V17L3DY supports both interlaced and progressive signal formats, making it adaptable to a broad spectrum of broadcasting standards.

The monitor's ergonomic design features a sturdy and lightweight chassis, making it suitable for both desktop and rack-mounted applications. Its flexible mounting options allow for easy integration into any setup, whether in a studio, on location, or within an OB van.

Additional features include embedded audio monitoring capabilities, allowing users to check audio levels directly from the monitor, and a set of user-friendly controls for adjusting settings quickly and intuitively. This combination of advanced technology, exceptional display quality, and practical usability makes the JVC DT-V17L3DY a reliable choice for professionals in the video production industry. Whether used for editing, monitoring, or playback, this monitor stands out as a valuable tool for achieving the highest standards in broadcast quality.
Top Page Image Contents