1 
Getting started
Controls and features
Main body - Front
③Indicator
STANDBY/ON LAMP WARNING
④ Exhaust Vent |
|
|
| ① Lens | ④ Exhaust |
| ② Remote receiver (front) | Vent |
① Lens | ③ Indicator |
|
This is a projection lens. Please do not look inside during projection.
Please see “About the indicator display” for details. (Reference page: 16)
② Remote receiver (front) | ④ Exhaust Vent |
Please aim the remote control at this area when | Warm air flows out in order to cool the interior of |
using it. | the set. Please do not block the vents. |
* There is also a remote receiver at the rear. |
|
Main body - Bottom
⑤Inlets ⑥ Manual button for
lens cover
⑦ Feet
⑤Inlets (at 3 points on the rear/
bottom)
In order to cool the inside of the unit, air is let inside. Do not block or prevent the outflow of hot air. Doing so could lead to failure of the unit.
*There are inlets at two points on the right and left sides of the rear side. (Reference page: 15)
⑥Manual operation button of the lens cover
The lens cover can be opened when pressed down.It is used for maintenance and not used during normal use.
⑦Feet
The height (0 to 5 mm) can be adjusted by turning the foot.
14