JVC DLA-RS40, DLA-RS60, DLA-RS50 manual Hdmi, 235, 255

ENGLISH

Adjustments and settings in the menu (continued)

Mask			It hides the upper, lower, left and right borders of the screen with a black mask. Can be
			individually adjusted vertically and horizontally. Please adjust to your preference.
			Setting: Off, 2.5%, 5%, Custom	[Off]
	Off		Not masked.
	2.5%		Compared to the original video images, around 2.5% around the video images are
			masked.
	5%		Compared to the original video images, around 5% around the video images are masked.
	Custom
		Left	Compared to the original video images, around 5% of the video images are masked on
			the left side.
			Settings: 0 ~ 5%	[0]
		Right	Compared to the original video images, around 5% of the video images is masked on the
			right side.
			Settings: 0 ~ 5%	[0]
		Top	Compared to the original video images, around 5% of the video images are masked at the
			upper side.
			Settings: 0 ~ 5%	[0]
		Bottom	Compared to the original video images, around 5% of the video images are masked at the
			bottom side.
			Settings: 0 ~ 5%	[0]
Progressive			Interlaced signals (480i/576i/1080i) are converted to progressive signals. Interpolates
			interlaced signal video images with video images from the surrounding. Please set to your
			preference.
			Settings: Auto, Off	[Auto]
	Auto		It is automatically detected if the 24p video images, which can be seen in the film screens,
			interlaced signals from the original video material or if they are the product of signal
			conversion and are interpolated accordingly.
	Off		The interpolation of video images as interlaced video signals, e.g. video material is done.

[2-1] HDMI

Input		(*) It can be set when the HDMI terminal is selected.
		Sets the dynamic range of the input video images (scale). Dark and bright areas, which
		are not matched to the range, might get brighter or darker. If you are unsure of the input
		signal dynamic range, please check under "Level Check".
		Settings: Standard, Enhance, Super White	[Standard]
	Standard	It gets set if the dynamic image range of the gradation level of the input image is set to
		16-235. In case of a video signal, please set it up here.
	Enhanced	It is set if the dynamic range of the input video scale level is 0-255.If these are PC signals,
		please set them here.
	Super White	It is set if the dynamic range of the input video scale level is 16-255.Please set the output
		to video equipment compatible with Super White for Super White-enabled DVD / BD etc.

Level Check		You can confirm the dynamic range of the input signal.A pattern as shown in the
0	235	illustration is displayed in the four corners and center of the screen. Please compare the
		dynamic range of input signal with this pattern illustration and confirm.
255	16	(*) The number in the illustration is the scale level. This number is not displayed. The
		illustration of the gradation in the figure is accentuated for explanatory purposes It is
		different from the actual scale level.

Color Space		It sets the color space of the input signal.
		Settings: Auto, YCbCr(4:4:4), YCbCr(4:2:2), RGB	[Auto]
	Auto	YCbCr(4:4:4), YCbCr(4:2:2), RGB signals are automatically detected and configured.
	YCbCr (4:4:4)	Sets it if the input of the YCbCr(4:4:4) input video image signal is performed.
	YCbCr (4:2:2)	Sets it if the input of the YCbCr(4:2:2) input video image signal is performed.
	RGB	It is set when the RGB video signals input is performed.
Control with HDMI		Configured communication of the HDMI equipment control
		Settings: On, Off	[Off]

Operation

51