JVC DLA-RS40, DLA-RS60, DLA-RS50 manual Advanced

3 Operation

Adjustments and settings in the menu (continued)

[1-2] Advanced

Sharpness		You can set the sharpness and detail enhance to "[1-2-1] Sharpness" of the submenu
NR		Reduces the noise of the video images. Please adjust to your preference.
	RNR	Adjusts the intensity of random noise elimination of the image.
		Values: (Low) 0 to16 (strong)	[0]
	MNR	Adjusts the intensity of mosquito noise elimination of the video images.
		(*) It is not possible to set it when the "Picture Mode" is set to "3D".
		Moreover, it is not possible to set it when there is an input of HD input signals.
		Values: (Low) 0 to16 (strong)	[0]
	BNR	Reduces the block noise of the video images.
		(*) ) It is not possible to set it when the "Picture Mode" is set to "3D"
		Moreover, it is not possible to set it when there is an input of HD input signals.
		Settings: On, Off	[Off]
Color Space RS450		You can switch the color space display of the projector output.
		Settings: Standard, Wide 1, Wide 2
	Standard	Equivalent to the HDTV color space
	Wide 1	Equivalent to the color space of the DCI standard
	Wide 2	A color space that is broader than Wide1
Custom Gamma		It is possible to set the gamma curve and save it. Please adjust to your preference.
		To "[1-2-2] Custom Gamma" of the submenu
Color Management		It is possible to set the color of the screen to the preferred color and save it.
RS50 RS506		To "[1-2-3] Color Management" of the submenu.
Clear Motion Drive		It improves video images with fast movements to produce clear video images with little
		residual image retention.
		For PC and 3D signals, the "Clear motion Drive” cannot be set.
		Moreover, the images in some scenes may be distorted. In such a case, please select
		"Off".
		Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Film motion	[Off]
	Off	Off
	Mode 1	Black insertion weak
	Mode 2	Black interpolation strong
	Mode 3	Interpolation weak
	Mode 4	Interpolation strong
	Inverse Telecine	With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image
		footage is changed to a 24 frame display.
		(*) 24p will not function.
CMD Demo		It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion
		drive. Upon pressing the button "OK", it will be displayed on all sides of a screen in the
		center split into two parts. Finally, it will turn to "Off”. It cannot be set for PC and 3D
		signals.
		Settings: Left -> right -> top -> Bottom -> Off (changed with "OK" button)	[Off]
	Left	The left screen displays a demonstration of the Clear motion drive.
	Right	The right screen displays a demonstration of the Clear motion drive.
	Top	The upper screen displays a demo of the Clear motion drive.
	Bottom	The screen below displays a demo of the Clear motion drive.
	Off	The Demo of the Clear motion drive is turned off.
Lens Aperture		Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully
		opened.
		Settings: (Dark) -15 to 0 (bright)	[0]

48