ENGLISH 
Controls and features (continued)
Main body - Warning display and confirmation/response
Warning display
You are informed of the contents of warning notices by the (repeated) displays of the [WARNING] and [LAMP] indicators. Moreover, the [STAND BY / ON] indicator, which shows the operating mode of the unit, is displayed simultaneously as described above.
Upon activation of the warning mode, the projection is interrupted at the same time for about 60 seconds and the cooling fan is turned on. Please disconnect the power plug from the electric socket after the cooling fan has stopped. Subsequently, please perform the following checks and take appropriate countermeasures.
Lighting/flashing lights | Blinking | Content | Confirmation and | |||
status diagram | Frequency | countermeasures | ||||
| ||||||
|
|
|
|
|
| |
|
|
| 1 time | Abnormalities in the power |
| |
|
|
| supply |
| ||
|
|
|
| ● Check that nothing is | ||
STANDBY/ON | LAMP | WARNING | 2 times | Cooling fan stops | ||
|
|
| blocking the air inlets. | |||
|
| (red) |
|
| ● Check that the external | |
|
|
| Internal temperature is too | |||
|
| 3 times | temperature is normal. | |||
Mode |
|
| high |
| ||
|
|
|
| |||
|
|
|
| Action | ||
|
|
| External temperature is | |||
display |
|
| 4 times | |||
|
|
| too high | Leave the unit until it cools | ||
|
|
|
| |||
|
|
|
|
| down. | |
|
|
| 1 time |
| ||
|
|
|
| After that, turn on the power | ||
|
|
|
|
| ||
STANDBY/ON | LAMP | WARNING | 2 times | Abnormal electrical circuit | again. | |
|
|
|
|
|
| |
| (orange) | (red) | 3 times |
|
| |
|
|
|
| |||
|
|
|
| |||
Mode | Simultaneous |
| If something is wrong with |
| ||
display | flashing | 4 times | ● Check that an impact shock | |||
the automatic lens cover | ||||||
|
|
|
| has not occurred during | ||
|
|
|
|
| ||
|
|
|
|
| operation. | |
|
|
|
| Lamp does not light up | ||
|
|
| 1 time | ● Check that the lamp | ||
STANDBY/ON | LAMP | WARNING | and unit is unable to | unit and lamp cover are | ||
|
|
| project | correctly installed. | ||
|
|
|
| |||
|
|
|
|
| ● Check that nothing is | |
Mode | (orange) | (red) |
| Lamp is turned off during | ||
2 times | blocking the auto lens | |||||
display |
|
|
| projection | cover. | |
|
|
| 3 times | Lamp cover is removed | Action | |
|
|
| Turn on the power again. | |||
|
|
|
|
|
| |
If the warning indication is displayed again, please wait for the cooling fan stopped, then pull out the power plug from the power outlet. Then call your authorized dealer for repair.
Getting Started
17