LCD Projector User Guide
Starting the Presentation
We recommend turning on the projector and image sources in the order listed here.
1.Connect the signal cable to the computer or video source.
2.Connect the power cord to the projector and to a power source. The Power light begins to blink.
3.Turn on the presentation components in the order listed. To turn on the projector, remove the lens cap and press the Power button on either the remote control or the keypad, when lamp ready LED is on.
Note: You might not be using all of these components for your presentation.
•Video source such as VCR, VCD, DVD or digital camera.
•Audio source if different from your video source or computer
•Projector
•Computer
Power button
Note : Many laptop computers do not automatically turn on their external video port when another display device is connected. Refer to your computer’s user guide for the function key or command that activates the port. MAC users may need to turn on SimulSCAN or monitor mirroring. Refer to the computer manual.
8