Maintenance
Maintenance
Change the Lamp Module
Important: The lamp contains trace amount of mercury. Some government required special disposal of lamps containing mercury. Dispose of lamps in accordance with the law and any applicable local regulations.
The lamp module should be replaced with a certified replacement part. To order a new lamp, contact your local dealer.
After change the lamp module, see “Lamp Hours Reset” on page 15 to reset lamp hours.
Warning:
1.When replacing the lamp, be sure to turn off power and unplug the power cord. To avoid burns, wait 45 minutes before opening the lamp module door and do not touch any hot surface inside.
2.Do not loosen or remove any screw other than lamp module or its door. Doing so may cause electric shock.
To replace the lamp module:
1.Turn off the projector and let the unit cool down at least 45 minutes.
2.Unplug the power cord from projector.
3.Turn the projector upside down. Loosen the screw with a flat head screw- driver then lift up to remove the lamp module door and keep screw on the door carefully.
English
19