Troubleshooting
Remote Control
|
|
|
|
Problem | Cause and Solution |
| English |
Projector responds poorly | • Make sure that the total distance from the |
| |
|
| ||
or not at all to the remote |
|
| |
remote to the projector is no more than 32 feet |
|
| |
control. |
|
| |
(10 m). |
|
| |
|
|
| |
| • Point the remote control at the screen or at the |
|
|
| front of the projector. |
|
|
| • Make sure nothing is blocking the infrared |
|
|
|
| ||
| sensor on the front of the projector. |
|
|
| • Darken the room. The lighting might be |
|
|
| effecting the remote control. |
|
|
| • Replace the remote control batteries. |
|
|
Lamp |
|
|
|
Problem | Cause and Solution |
|
|
No light is coming from the | • Make sure that the power cord is properly |
|
|
lamp. | connected to a fully functional AC electric outlet. |
|
|
| The Power light blinks when the power is |
|
|
| connected but the projector is not turned on. |
|
|
| The Power light is a steady green when the |
|
|
| lamp is running. |
|
|
| • Make sure that the power cord is properly |
|
|
| connected to the projector. |
|
|
| • Make sure that you have removed the lens cap |
|
|
| on the projector lens at the front of the projector. |
|
|
| • Make sure you have pressed the Power button |
|
|
| and the Power light is a steady green. |
|
|
| • Check the projector’s lamp to make sure that it |
|
|
| is securely connected in the lamp module. |
|
|
| • Make sure that the lamp module door is fully |
|
|
| closed. |
|
|
| • Make sure that the cable connectors do not |
|
|
| have any bent pins. |
|
|
| • Replace the lamp. |
|
|
|
|
|
|
Lamp shuts off. | • A minor power surge may cause the lamp to |
|
|
shut off. Press the Power button twice to turn off |
|
| |
|
|
| |
| the projector. (The Power light continues to |
|
|
| blink and the fan continues to run until the |
|
|
| projector cools down.) Wait at least three |
|
|
| minutes, then press the Power button again. |
|
|
| • Replace the lamp module. |
|
|
|
|
|
|
25