Luxeon AV-X2Plus manual Battery Safety

Page 31

LCD Projector User Guide

Caution: Never operate your projector without the lamp module or lamp module door. Doing so may damage the projector.

Caution: Proper ventilation is important. Don’t block ventilation openings. Never operate this projector in an enclosed area. Do not place the projector on a tablecloth or other soft covering that may block the vents. With ceiling installations, use approved mounting hardware. Do not put the projector near heat ducts, air cleaners, transformers or other electrical devices. For perma- nent installations follow local codes.

Caution: Do not touch the glass portion of the new lamp module with your hands or allow it to touch other objects as this may damage it and shorten its operational life.

Caution: Do not drop the lamp module as the glass may shatter.

Battery Safety

Read and follow all warnings and instructions supplied by the battery manufacturer.

Keep batteries away from children.

Store batteries in their original packaging.

When inserting batteries, verify that the (+) and (-) terminals are aligned correctly.

Replace all batteries of a set at the same time.

Do not mix new batteries with used ones.

Do not use batteries of different chemistries, capacities, brands or sizes together. Leakage could result.

Do not disassemble, recharge, or short-circuit batteries.

Do not subject batteries to high temperature or fire.

Discard used batteries according to all applicable local and national regulations.

28

Image 31
Contents Page Specifications LCD Projector User Guide EN 55022 Warning Safety CertificationsFCC Warning CanadaTable of Contents Safety Definitions Projector Safety Battery Safety Power Indicator Image Quality Sound Remote Control LampWhat’s in the Box IntroductionRemote Instruction Projector FeaturesOSD Menu Funciton How to use RemoteUsing the Laser Pointer Remote mouse functionConnecting the Projector Starting the Presentation To turn off the projector Turning Off the ProjectorOSD Menu Format and Description Tracking Data only Picture Menu at Video ModeHorizontal position Data only Vertical position Data onlyUtilities 2 Menu Utilities 1 MenuAuto Source Reset AllOSD Position Auto ImageStatus at Video mode Status at PC ModeInput source select Lamp Hours ResetLamp Off Control Auto Image In ProgressOut of Range Screen sizes are Positioning the ProjectorMode Names Used Resolution Frequency KHZ Frequency HZ Preset TimingChange the Lamp Module MaintenanceTo replace the lamp module Cleaning the Exterior Case Cleaning the Projection LensCleaning the Air Filter Power Indicator TroubleshootingIndicator Light Status Condition Image Quality Problem SolutionSound Problem Cause and SolutionLamp Remote ControlImage Source Safety Definitions SafetyProjector Safety Battery Safety English