Luxeon AV-X2Plus manual Image Quality, Problem Solution

Troubleshooting

Image Quality

Problem	Solution	English
Color or text is not being	manual.) But this projector can compress
	Adjust the brightness up or down until the text is
projected.	visible.
Some text or fonts are	For optimal results, set the computer’s resolu-
not sharp with a com-	tion to 1024 x 768. (Refer to your computer user
puter as an image	resolutions up to 1280 x 1024.
source.
Image isn’t centered on	• Be sure that the projector is at a 90° angle to
	the screen.
the screen.	• Reposition the image.
Image is out of focus.	• Turn the projection lens to focus the image.
	• Make sure that the projection screen is at least
	5 ft (1.5 m) from the projector.
	• Check the projection lens to see if it needs
	cleaning.
Image and menus are	• If projecting from a ceiling mount, make sure
	that Ceiling Projection is selected on the Setup
upside down.
	tab in the Menu.
	• If projecting from an upright position, make
	sure that Front or Rear projection is selected on
	the Setup tab in the Menu.
Image and menus are	• If projecting from behind a screen make sure
	that Rear Projection is selected on the Setup tab
reversed from left to	in the Menu.
right.	• If projecting in front of a screen, make sure that
	Front or Ceiling Projection is selected on the
	Setup tab in the Menu.
	To adjust the contrast:
Image appears flat with	1.Press Menu and use the Adjust + -buttons to
	go to the Adjust tab.
no contrast	2.Use the Next button to highlight Contrast.
	3.Use the Adjust + - buttons to increase or
	decrease the contrast.
	• Check the projection lens to see if it needs
Image appears washed	cleaning.
	• To adjust the brightness:
out or dark
	1.Press Menu and use the Adjust + - buttons
	to go to the Adjust tab.
	2.Use the Next button to highlight Brightness.
	3.Use the Adjust + - buttons to increase or
	decrease the brightness.

23