Safety
Safety
These safety precautions include information to prevent personal injury and damage to the projector.
Safety Definitions
Warning: Statements identify conditions or practices that could result in personal injury.
Caution: Statements identify conditions or practices that could result in damage to your equipment.
Warning: For information about use of a feature, please refer to this User Guide.
Warning: Hot surface. Do not touch.
English
Projector Safety
Warning: To replace the lamp, turn off the power and unplug the power cord. To avoid burns, wait 45 minutes before opening the lamp door. Follow all instructions provided in this User Guide. See “Changing the Lamp Module” on page 17.
Warning: When you open the lamp module door, be careful not to touch the hot surfaces inside.
Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground terminal.
Warning: Don’t look directly into the lens when the lamp is on. Doing so may cause eye injury.
Warning: Servicing your own projector may expose you to hazards or create potential hazards. Also, servicing your own projector will void the warranty. Refer all service to qualified service personnel.
Warning: In the unlikely event of the bulb rupturing, thoroughly clean the area behind the projector and discard any food that might have been contaminated with broken glass.
Warning: Do not loosen or remove any screws other than those on the lamp module door and the lamp module. Doing so may result in electric shock.
Caution: Don’t set liquids on the projector. Spilled liquids may damage your projector.
Caution: Don’t put the projector on a hot surface or in direct sunlight.
Caution: Do not drop the projector.
27