Head
30. Gamma selection switch
OFF
ON
31. Shutter selection switch
60
50
| Part Name | Function | Reference Page |
|
|
|
|
31 | Gamma selection switch | Gamma selection is used for adjusting the luminance shade with the |
|
|
| device to connect RGB output to. Generally, it is recommended to |
|
|
| use ON when connecting to the CRT monitor; use OFF when |
|
|
| connecting to the LCD projector. The luminance shade may not |
|
|
| match depending on the type of projector. Use ON in such a case. |
|
|
|
|
|
32 | Shutter selection switch | In an area where power frequency is 50Hz, using the unit with |
|
|
| flicker correction switch set to [60] may cause flickering due to |
|
|
| illumination of AC power discharge tube, such as a fluorescent or a |
|
|
| mercury lamp. |
|
|
| Using the unit the flicker correction switch set to [50] may reduce |
|
|
| the flickering. |
|
|
| This switch is |
|
|
|
|
|
9