4. OPERATION PROCEDURES
Simple steps for presenting printed material
(1) Turn ON the power switch.
Note: - Before turning ON the power switch, connection to
the monitor should have been completed.
-The indication lamp (green LED) on the front operation panel shows the initial setting condition of each function of the Presenter.
-If the power switch is turned ON immediately after being turned OFF, the Presenter may not operate. For restarting, turn ON the power switch several seconds after turning OFF.
(2)Place the object on the stage. Adjust the image size according to the object size using the zoom buttons [TELE] and [WIDE] on the operation panel or wireless remote control, while watching the image on the monitor.
(3)Press the auto focus button [AF] on the front operation panel or remote control for focusing.
Note: The auto focus function works up to a height of
approx. 10 cm above the stage surface.
Front operation panel
Wireless remote control
Front operation panel
Wireless remote control
16