Elmo HV-5000XG instruction manual Monitor output, Table of video-in/out terminal selections

Monitor output

The signal to be outputted to the NTSC/PAL monitor is selected. When the input has been set to RGB1 or RGB2 and the monitor output button [RGB1/RGB2] on the front operation panel is pressed, the indicator lamp is switched accordingly, and the images by the equipment connected to the external input terminals [RGB1] and [RGB2] are presented on the NTSC/PAL monitor.

The signals to be outputted are as shown in Table below on the next page.

When the built-in camera button [MAIN] in the monitor output on the front operation panel is pressed, the indicator lamp is switched accordingly, and the image by the built-in camera is displayed on the NTSC/PAL monitor.

Notes: - When the built-in camera button [MAIN] in the input selection on the front operation panel or wireless remote control is pressed, the image by the built-in camera is resumed.

-Of all signals inputted into the external input terminals [RGB1] and [RGB2], those signals having the frequencies as specified in the following page can be outputted to the NTSC/PAL monitor.

Front operation panel

Table of video-in/out terminal selections

Input		Output signal	RGB output terminal	Composite output terminal	S-video terminal
Input selection	Monitor output : When MAIN is selected		Main camera input image	Main camera input image	Main camera input image
MAIN	Monitor output :	When RGB1/RGB2 is selected	Main camera input image	Main camera input image *	Main camera input image *
Input selection	Monitor output : When MAIN is selected		RGB1 input image	Main camera input image	Main camera input image
RGB1	Monitor output :	When RGB1/RGB2 is selected	RGB1 input image	RGB1 input image	RGB1 input image
Input selection	Monitor output : When MAIN is selected		RGB2 input image	Main camera input image	Main camera video
RGB2
	Monitor output :	When RGB1/RGB2 is selected	RGB2 input image	RGB2 input image	RGB2 input image

Note: *When the input selection is the built-in camera (MAIN), RGB1/RGB2 cannot be selected for the monitor

output.

20