Elmo HV-5000XG instruction manual Rear Panel, HD-80XG, RS-232C

Rear Panel

21. Power Cord Receptacle 22. AC Outlet 24. Infrared Sensor 26. Analog RGB Output Terminal 28. Video-in Terminal 1

OUTLET

UNSWITCHED

AC120V~60Hz (MAX. 3.2A)

12V 0.9A

RGB OUT

S-VIDEO

VIDEO

RGB1

RGB2

	23. DC Output Terminal	25. RS-232C Terminal 27. Video-out Terminal	29. Video-in Terminal 2
		- S-Video (mini DIN 4P)/
		- Composite-Video (RCA pinjack)
	Part Name	Function		Reference Page
21	Power Cord Receptacle [AC IN]	Connected to the power cord.
22	AC Outlet	To supply power up to 400W (Not interlocked with the power switch).
23	DC Output Terminal	To output 12VDC. The LCD Color Monitor (LM-5011N) or
	[OUTPUT]	ELMO Desk-top Presenter (HD-80XG) can be connected with the
		supplied DC cable.
		Note: Do not connect any equipment other than LM-5011N
		and HD-80XG.
24	Infrared Sensor	The light receiver of the wireless remote control. When operating		P.11
		the Presenter from behind, aim the wireless remote control at this
		light receiver.
25	RS-232C Terminal	To connect a PC with an RS-232C cable to control the Presenter from		P.25
	[RS-232C]	the PC.
26	Analog RGB Output Terminal	To connect RGB input equipment, such as an LCD Projector and a
	[OUTPUT ⋅ RGB OUT]	Multi-SYNC Monitor, to output the image.
27	Video-out Terminal	To connect a NTSC/PAL conformable monitor, such as a TV
	[OUTPUT ⋅ S-VIDEO/VIDEO]	monitor and the LCD Color Monitor (LM-5011N), to output the
	S-Video (mini DIN 4P)	image.
	Composite-Video (RCA pinjack)
28	Video-in Terminal 1	Video signal from this terminal is output when input selection is set		P.19
	[INPUT ⋅ RGB1]	at RGB1.
29	Video-in Terminal 2	Video signal from this terminal is output when input selection is set		P.19
	[INPUT ⋅ RGB2]	at RGB2.

8