Connection to the monitor and the projector

Connection to the monitor and the projector

Notes: - Be sure to turn OFF the power supply to all equipment before making any connections to protect the Presenter and all the connected equipment.

- Hold the cable plug part when connecting or disconnecting the cables.

Connection to the RGB-in terminal

Connect the RGB output terminal of the Presenter to the RGB input terminal of the equipment with the supplied VGA cable or a RGB connection cable available on the market.

If the display image shifts from the center, manually adjust the horizontal/vertical positions through the connected equipment.

If vertical stripes appear on the screen with the use of video projector, it may be improved by manually adjusting the dot-clock frequency of the projector.

Projector

AC IN	OUTLET
	UNSWITCHED
	AC120V~60Hz (MAX. 3.2A)
	OUTPUT
	12V	0.9A

RS-232C

OUTPUT

RGB OUT

S-VIDEO

VIDEO

INPUT RGB1

RGB2

Monitor

Connection to the composite video-in terminal

Use the supplied RCA video cable with RCA pin plug.

Note: The video output of this Presenter is set to NTSC before shipment from our factory. To connect to the PAL monitor, switch the down converter output mode from NTSC to PAL.

Reference Page

- NTSC/PAL switching

P.21

AC IN	OUTLET	RS-232C	OUTPUT
	UNSWITCHED		RGB OUT
	AC120V~60Hz (MAX. 3.2A)
	OUTPUT
			S-VIDEO
			VIDEO
	12V	0.9A

TV monitor

INPUT

RGB1

RGB2

LCD monitor

Connection to the S-video-in terminal

Connect the S-video-out terminal (mini DIN 4P) of the Presenter to the S-video-in terminal of the monitor. For the S-video output mode, use the supplied 4P mini DIN cable (for S-video) or an S-vide connection cable available on the market.

If the equipment to be used is provided with a Y/C separate connector, a conversion adapter is necessary.

AC IN	OUTLET
	UNSWITCHED
	AC120V~60Hz (MAX. 3.2A)
	OUTPUT
	12V	0.9A

RS-232C

OUTPUT

RGB OUT

S-VIDEO

VIDEO

INPUT RGB1

RGB2

TV monitor