Using the Listening Modes—Continued
4 | Press the [SETUP] button. |
| |
| Setup closes. |
| SETUP |
The Audio Adjust settings are explained below.
Input Channel Settings
■Multiplex
■Center Width
With this setting, you can adjust the width of the sound from the center speaker when using the Pro Logic II Music or Pro Logic IIx Music listening mode. Normally, the center channel sound is output by only the center speaker. (If you’re not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting adjusts the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. It can be adjusted from 0 to 7 (default value is 3).
This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.
Main: The main channel is output (default). Sub: The sub channel is output.
M/S: Both the main and sub channels are output.
■Mono Input Ch
This setting determines which channel is output when the Mono listening mode is used with a stereo source.
L+R: Both the left and right channels are output (default).
L:Only the left channel is output.
R:Only the right channel is output.
PLII and PLIIx Music Mode Settings
These settings apply to only
■Panorama
With this setting, you can broaden the width of the front stereo image when using the Pro Logic II Music or Pro Logic IIx Music listening mode.
On: Panorama function on.
Off: Panorama function off (default).
■Dimension
With this setting, you can move the sound field forward or backward when using the Pro Logic II Music or Pro Logic IIx Music listening mode. The default value is 0. It can be adjusted from
If the stereo image feels too wide, or there’s too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it’s in mono, or there’s not enough surround sound, move it backward.
DTS Neo:6 Music Mode Setting
■Center Image
The DTS Neo:6 Music listening mode creates
When set to 0, the front left and right channel output is attenuated by half
Dolby Digital EX Input Signal Setting
■Dolby EX
This setting determines how Dolby Digital EX signals are handled. This setting is unavailable if no surround back speakers are connected or speaker set B is on.
Auto: If the source signal contains a Dolby Digital EX flag, the Dolby Digital EX listening mode is used (default).
Manual: You can select Pro Logic IIx Movie, Pro Logic IIx Music, Dolby Digital, or Dolby Digital EX.
53